Oscam for Windows

Latest download of Oscam for Windows.

All binaries on this website were built on a cygwin environment and compiled with the default modules.

The build process is fully automated and new revisions are checked every 30 minutes.
If the build process seems to have any problems, please leave a comment below and I will fix it. 

Changes

You can check the version changelog at http://streamboard.tv:8001/timeline.

Downloads

Place oscam.exe in the same folder of cygwin dlls and configuration files.
Remember to update the cygwin dlls and use the ones provided here because they are from the enviroment where oscam was compiled.

oscam-cygwin-svn-11279.zip 749.6 KB 11/1/2016 6:51 pm
oscam-cygwin-svn-11273.zip 749.6 KB 9/16/2016 10:12 pm
oscam-cygwin-svn-11209.zip 723.2 KB 1/15/2016 6:37 pm
oscam-cygwin-svn-10660.zip 681.5 KB 5/14/2015 9:15 pm
oscam-cygwin-svn-10648.zip 680.8 KB 4/8/2015 11:48 pm

For older versions, please check our archive which contains releases for the last few months.

Other Downloads

List Smargo (included in distribution) If you want to use SMARGO´s you can use this utility to list the devices.
Cygwin-dlls (1.34 MB) The cygwin DLL´s need to be on the same directory in order to run oscam.exe successfully.
Oscam-doc-examples (45.08 kB) The configuration files by default are read from the same folder of oscam.exe.
CCcam Converter 1.2 (376.52 kB) To convert CCcam.cfg to Oscam configuration files you can use this converter.
Oscam Launcher A launcher that allows you to install Oscam as a windows service and update when there are new releases.

If you like my work, please consider making a donation and help me pay for the hosting and bandwidth.

If you want to automatically convert your CCcam.cfg to Oscam, please check this post.

🙂

545 Responses to Oscam for Windows

  1. Pingback: CCcam to Oscam – Converter « Cardsharing « tek.readers

  2. netbus666 says:

    Thanks for giving the windows users a fast compilation of OSCAM!!!!!

    • Mr xfighter says:

      I would like to report a bug in Oscam. Recent Oscam Version Especially After oscam-cygwin-svn-5898 fails to initialize newcamd readers or proxies like they are called in the web interface. I hope that you guys fix this in your next update. Please Use The Version oscam-cygwin-svn-5898 and use a newcamd reader protocol and use the last version to see the big difference in the connection… I hope that you identify the error and have it fixed in the coming version. As for now I am very satisfied with oscam-cygwin-svn-5898. In case you fixed the issue in your next version PLEASE LET ME KNOW….

      Thank You Very Much For Your Amazing Efforts….

    • Emilio Wayne says:

      Hi, i need solution oscam not open channel on jynxbox ultra hd cw ok not video or audio.

  3. cybersim says:

    Thanks for the CGYWIN compilation of OSCAM!
    Hope that CCCam proxy feature for Windows user will be optimized soon.
    Great job, guys!

  4. Gillo_Grumlin says:

    Great work, but I see no updates since the 2nd of May. I like the work you have done so far, hope it continues.

  5. Hugo says:

    Sorry, Had to make some tweaks on the build server.
    It´s back online and building the revisions every 30 minutes.

  6. Nertil says:

    Well done. Works like charm.

  7. Laura says:

    Hi, thanks for the windows version!
    cheers, Laura

  8. rudi77 says:

    win7 64bit.

    Very slow oscam-cccam server!

  9. rudi77 says:

    win7 64bit

    Problem oscam-cccam server: high cpu usage
    Im wait optimized good verzio.

  10. troy says:

    These comments seem to suggest this oscam port should be run on a 32bit version of windows 7?
    Is the optimalisation for 32 bit better then for 64x ?
    Anyone tried it?

    • Hugo says:

      Oscam always runs in 32 bit. But it should run well on any windows 64 bit thanks to the 32 bit subsystem that microsoft has implemented on all 64 bit version of windows.
      I do not use oscam on windows and cannot give you much help on this matter. But you can always check the oscam support foruns for more help.

      Take a look : http://oscam.ump2002.net/

  11. Pingback: Bytte kortserver – NewCS mot Oscam « Allt om MediaCenter

  12. roberto says:

    I got this error when usign the utility to list my smartreader
    Looking for smartreader with an out endpoint = 0x82 :
    coulnd’t open device 001:001
    please need help

    • Anucha says:

      This problem can find in google search.

      You must write the device as

      /dev/ttySx > that x mean “the reader port number minus 1”

      You can check port of reader in device manager of windows.

      • Hugo says:

        Yes, under cygwin you have to use the Unix like names for the serial ports.

        /dev/ttyS0 == COM1
        /dev/ttyS1 == COM2
        /dev/ttyS2 == COM3

        and so on….

  13. Anucha says:

    I have ask question about error “Too many open files” as in this link. But no one can answer.

    http://www.oscam.to/wbb3/index.php?page=Thread&threadID=8216

    Could you please help to solve the problem?

    • Hugo says:

      Please provide more information.
      What version of Windows are you running?
      How many readers and users do you have configured in Oscam?

  14. Possi says:

    Hallo,

    warum kann ich nicht die dlls downloaden? was muss ich dafür machen?

    Hey

    why cant i download the dlls? What have i to do?

  15. Peter says:

    hi,

    since svn 56xx there comes no ATR and “ERROR activating Card” .
    I´m using seriell Smarmouse with fixed 6,00 mhz, S02 Card, Win7.

    The Versions svn 5509,5533 and 5554 are running quite well with the same configs!

  16. ahefs says:

    How to PC + oscam+ vplug server ?

  17. halcen says:

    merci infiniment pour les efforts deployés….
    voila mon probleme ; j’ai le pack windows et donc oscam marche comme un service windows,seulement il s’arrete tout le temps et je suis obligé de redemarrer le service…
    aidez moi s’il vous plait !!!

  18. masterof says:

    Hello,

    please, can you builded automatically stable version 1.10 of cygwin builds?

    cu masterof

  19. emm says:

    Can you,please,build oscam with dvbapi?
    Thanks for your efort.

  20. CG121 says:

    Version 5954 here actually reports itself as version 5953….

  21. george says:

    please help on how ot extract or get tweak keys from irderto cards

  22. Mac says:

    Which version of oscam support ECM doublecheck?

    thx

  23. Murphy says:

    Where can I found a stable 1.10 version?

  24. steve says:

    It has already been asked but what stable release should I be running as I just use the latest all the time but its marked unstable?? Sorry newbie to oscam but keep up the gr8 work much appreciated.

    In the earlier releases it just gives SVN number not Oscam 1.10 so not sure where to get it. Again cheers

  25. steve says:

    have an issue on win 7 64 bit using infinity reader. All seems to work ok but getting these errors in log…
    2011/10/26 1:21:47 F96C48 c dreambox1 (0963&000000/0EED/6A:3F02): found (109 ms) by sky_uk
    2011/10/26 1:21:55 F96C48 c dreambox1 (0963&000000/0EED/6A:2064): found (93 ms) by sky_uk
    2011/10/26 1:22:03 F8F980 r ERROR in IO_Serial_WaitToRead: (errno=4 Interrupted system call)
    2011/10/26 1:22:03 F96C48 c dreambox1 (0963&000000/0EED/6A:9F89): found (109 ms) by sky_uk
    2011/10/26 1:22:11 F96C48 c dreambox1 (0963&000000/0EED/6A:D38B): found (94 ms) by sky_uk
    2011/10/26 1:22:19 F8F980 r ERROR in IO_Serial_WaitToRead: (errno=4 Interrupted system call)
    2011/10/26 1:22:19 F96C48 c dreambox1 (0963&000000/0EED/6A:E51E): found (93 ms) by sky_uk
    2011/10/26 1:22:26 F8F980 r ERROR in IO_Serial_WaitToRead: (errno=4 Interrupted system call)
    2011/10/26 1:22:26 F96C48 c dreambox1 (0963&000000/0EED/6A:2299): found (110 ms) by sky_uk

    any Ideas what might be causing these? running oscam 1.20 unstable svn5960

  26. Toby says:

    Running on WIndows 7 64 bit with a Omnikey 3121

    keep getting OSCAM crashing with the following stack dump (nothing in the logs)

    Exception: STATUS_ACCESS_VIOLATION at eip=610DF91A
    eax=1A77CE64 ebx=00F45658 ecx=77580C48 edx=00000000 esi=00F456B0 edi=1ABBCE64
    ebp=1ABBCD98 esp=1ABBCD60 program=c:\program files (x86)\oscam\oscam.exe, pid 26472, thread unknown (0x67FC)
    cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B
    Stack trace:
    Frame Function Args
    1ABBCD98 610DF91A (00F45658, 1ABBCDD4, 610DF8E0, 00F45658)
    End of stack trace

  27. blackfalcon says:

    Hi!
    I can’t find anywhere how to enable dvbapi on oscam to work as plugin with dvbviewer.
    Or any possible way to enable oscam.exe functionality on dvbviewer.
    Please help 🙂

    • blackfalcon says:

      or ProgDVB or any other DVB-S/S2 viewer on windows

      • blackfalcon says:

        Now I saw that someone answered that that’s not possible.
        Is dvbapi possible on ubuntu or other versions of linux and with what DVB-S/S2 viewer application?

    • There is no DVBApi for windows.
      If you want to use programs like ProgDVB or DVBViewer you can use plugins that use the CCcam protocol or Newcamd. Search for “Hadu Cccam” or “WinCSC”.
      You connect to Oscam like any other box.

  28. Judas says:

    All oscam above 5888 windows version does after like 5 hours of use do timeouts randomly so via and c+ nordic freezes :(. Just wanted to let you all know that. 5888 does work great anyway 🙂

  29. DELFY says:

    thanks a lot

  30. Judas says:

    Local card works but if you try to add a newcamd it doesnt work with the new oscam versions :(. Get connection error.

  31. Mick says:

    Do you have a tweaked version get where we can insert keys? like the linux version currently out

  32. jamma1solo says:

    i run oscam on a 64 bit system windows 7 it works good for a day and then freeze i have to shut oscam down and then restart its been doing this every day any help thanks in advance

  33. Judas says:

    where are the newer builts ?. See that its 6032 now but the windows version never changes :(. Thanks for the good work anyway :=)

  34. Maurizio says:

    Hmmmm, it looks like the automated generator for windows is not working anymore.

    Too bad, als I really like to keep thnigs updated. Anyhow, this is a great source for getting the pre-compiled exe files.

    Keep up the good work!

  35. Sorry about that guys. There was an error with the building process.
    It should be ok now and building automatically again.

  36. Maurizio says:

    It looks allright now!

    Thanks for the quick service.

  37. Judas says:

    6034 for windows works perfect 😉

  38. Judas says:

    After 6034 card 090f 1500ms response 🙁

  39. claude says:

    Hi all
    Just for the sake of underdtanding…
    I have no smartcard reader for the moment…can I use this OScam_PC to connect to an external server and then connect other clients to this OScam server
    ( I have tried that, unsuccessfully…looks like Oscam_PC to external server is OK but clients to OScam_PC, connexion refused…)

  40. SMed79 says:

    #6059 in windows works perfect thank you 😀

  41. M_ALEX says:

    I try running oscam on winxp32bit with phoenix on com1.
    but always after correctly reading card info: cardserver is down!!! 🙁 why???
    How to run the server to keep working?

    2011/12/06 19:24:40 882540 r found cardsystem nagra
    2011/12/06 19:24:40 882540 r ROM: D N A S P 1 4 2
    2011/12/06 19:24:40 882540 r REV: R e v G 0 2
    2011/12/06 19:24:40 882540 r SER: ** ** ** ** (SN removed for security reasons)
    2011/12/06 19:24:40 882540 r CAID: 1803
    2011/12/06 19:24:40 882540 r Prv.ID: 00 00 70 01 (sysid)
    2011/12/06 19:24:40 882540 r Prv.ID: 00 00 00 00
    2011/12/06 19:24:40 882540 r Prv.ID: 00 00 71 01
    2011/12/06 19:24:40 882540 r [nagra-reader] ready for requests
    2011/12/06 19:24:40 882540 r ending thread
    2011/12/06 19:24:41 0 s init for all local cards done
    2011/12/06 19:24:41 0 s can’t open file “./oscam.ac” (errno=2 No such file or directory) anti-cascading table not loaded
    2011/12/06 19:24:41 0 s cardserver down

  42. Judas says:

    6070 has a viasat problem. After you login 2 times you get no picture

  43. shiraz says:

    hi there i have a little problem with oscam an dream box the problem is that when i order a ppv it does not show in the dream box but when i use oscam in windows i get the ppv to show what could be the problem? thanks in advance

  44. Hypnofrog says:

    Hi, is there a problem with the building script? the svn is at 8089 and the compiled here is at 8082?

  45. The build machine was without an Internet connection for 2 days.
    The damm ISP is always messing with our DSL connection. Anyway, its back online again.

  46. tommy says:

    hi there
    everything is working great , but i cant get my local remote dreambox to connect to windows oscam via nline , i tried all sorts but not luck , any ideas please?

  47. Judas says:

    After 6100 connection homenetwork failure. Error 16 if i remember right

  48. tommy says:

    Sorted , firewall problem

  49. Judas says:

    Still dont work to have 2 cards in network :(. Cant connect in local network

  50. max says:

    Hi i like to do a widnows update script.
    what is the correct platformstring to download in windows
    something like = “http://tekreaders.com/oscam-update/update.php?platform=windows&libusb=0&dthreads=0” ??

    Hallo wie ist die richtige Variable für den Downloadconnect unter Windows ?

    thx
    Max

  51. taha says:

    hello everyone I hope you add the protocol (mgcamd) and jai source code:

    mgcam_source.tgz – 115 KB
    http://www.mediafire.com/?70s4rohecxdbhtk

    thank you to all and Hugo

    • Hello taha, I am not the developer of Oscam, I only compile the source code from the public SVN and make it available on the website. You should make any request for features to the Oscam team.

  52. taha says:

    Thank you Hugo

  53. Christian Meier says:

    How do i connect a smargo using the Smartreader or the Smargo Protocol
    using cygwin??

  54. oscam + mediaportal says:

    @Chris

    oscam.conf should contain

    [global]
    nice=-20
    WaitForCards=1
    logfile=oscam.log;stdout
    [newcamd]
    key=0102030405060708091011121314
    port=15050@0100:00006A

    [webif]
    httpport = 88
    httpuser = oscam
    httppwd = oscam
    httprefresh = 10
    httpallowed = 127.0.0.1

    oscam.server should contain:

    [reader]
    label=canaldigitaal
    protocol=mouse
    #detect=RING
    group=1
    device=/dev/ttyS3
    caid=0100
    detect=CD
    mhz=500
    cardmhz=357

    oscam.user should contain:

    [account]
    user=tbs1
    pwd=tbs1
    group=1
    uniq=1
    caid=0100
    ident=0100:00006A
    au=canaldigitaal

    Above is ment for canal digitaal (dutch)
    ttyS3 means com4

  55. susmita says:

    Can any one help me how to integrate OScam in vlc media player?

  56. mateen says:

    Can anybody tell me what are the use case scenarios of OSCAM

  57. oscam + mediaportal says:

    svn-6213 doesn’t work with cygwin.
    After starting the applition it just ends and close.

  58. tony says:

    I’ve been out of the loop for a while. Does the current version of Oscam overcome the issues with NDS encryption?

  59. taha says:

    c quoi ce probleme depuis la version ,6200 le meme probleme

    merci

    http://img191.imageshack.us/img191/2179/10012012102714.jpg

  60. I have been making some more tests on the latest versions and you are right. They are crashing when all cccam readers are offline.
    Latest working version is #6191. Dont install any new version until I find a fix or the oscam team fixes it.

  61. I have been digging in the code and found a temporary fix for current svn build.
    Version 6241 should be working ok now. Please test.

    I will automatically apply the patch on the build process until the Oscam development team fixes the code. They are already aware of the situation.

  62. Gerdsch says:

    Version 4243 up have at all local cards 3000ms ecm time.

  63. taha says:

    I try the version 6241 c 6243 _ the same problem before

    thank you my friend Hugo

  64. Joacim says:

    Hi,

    I have problems with crashing oscam and suspect the recent install of “normal” Cygwin package conflicting with the cygwin DLLs in oscam folder.
    Could that be the case because they are not the of the same version….

    I have Cygwin\bin in %PATH%, should I remove the DLLs from oscam and use the “central” install or vice versa?

  65. MFco says:

    Hi @Hugo,
    binaries r6236 and before have about 948.906 bytes,
    binaries r6241 and above have about 2.154.362 bytes, why?

    Thx for the cygwin builds.

    • Hey, sorry about that. The 2mb versions are debug versions, which means they can be debugged with gdb or some other debugging tool. I forgot to disable that when I was testing and trying to fix the crashes.
      I have disabled it now, the next build should be of normal size again.
      Although, using a debug version should be fine, it works like the other versions.

  66. Luigi says:

    Very high response times (3001ms) since OScam build oscam-cygwin-svn-6241
    Revert to earlier version oscam-cygwin-svn-6236 works good (400ms)

    Please fix

  67. Luigi says:

    The older version oscam-cygwin-svn-6110 has with the same configuration files, 124ms response time.

    What changed?

  68. Luigi says:

    2012/01/27 12:59:41 10A5B90 c starting thread save lb stats
    2012/01/27 12:59:41 10A5B90 c save lb stats thread started
    2012/01/27 12:59:41 10A5B90 c usersky (09C4&000000/002B/90:DD33): found (137 ms) by sky
    2012/01/27 12:59:41 0 can’t write to file d:\oscam\stat

    can’t write to file d:\oscam\stat
    A Folder “D:\OScam\stat” exist. What is the problem?

  69. tim says:

    where i find oscam ymod? or is this oscam here with softcam support?

  70. Matthew says:

    Hi thanks for OSCAM ON windows.
    I have a problem with the users. The users are kept offline.
    I have set a port number and fowarded on my router. I had put a cline on my box like this
    c: ipadress port user pass

    It seems that the port is kept closed.
    Can you help please.

  71. tim says:

    @Matthew: you need a dyndns-adress.

  72. pop1234 says:

    Hi Hugo Rosário

    i find a copy of dealing with the Gbox server in Windows environment

    thx

  73. abed1988 says:

    Running on WIndows xp oscam 6483
    it will stop
    keep getting OSCAM crashing with the following stack dump (nothing in the logs)

    Exception: STATUS_ACCESS_VIOLATION at eip=610DF91A
    eax=1A77CE64 ebx=00F45658 ecx=77580C48 edx=00000000 esi=00F456B0 edi=1ABBCE64
    ebp=1ABBCD98 esp=1ABBCD60 program=c:\program files (x86)\oscam\oscam.exe, pid 26472, thread unknown (0x67FC)
    cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B
    Stack trace:
    Frame Function Args
    1ABBCD98 610DF91A (00F45658, 1ABBCDD4, 610DF8E0, 00F45658)
    End of stack trace

  74. Gerdsch says:

    Hello. Version 6478 run on windows 2003 “03 days 15:42:22” perfect. No problems!

  75. Daniel says:

    from version 6481 – 6504 only crashes on xp. it running till one hour. what was changed? what can i do, that worked it ?

  76. Judas says:

    From 6481-6514 oscam gives timeout after 10 minutes on local readers :(.

  77. Mr M says:

    Important!
    In ordert to run oscam stable there are two basic things YOU MUST DO.

    1. Do yourself a favour and Use a PCI or PCI-E to USB card. DO NOT use the USB ports on your motherboard. They are really poor quality and often faulty. This is very important. Most people are not aware of the bad quality of motherboard USB ports.

    2. Run oscam as a sevice by installing the oscam service wrapper: http://blog.rhysgoodwin.com/windows-desktop/service-wrapper-for-oscam/ Oscam is far to unstable to be run as a program, IT MUST be run as a windows service.

    • Thanks for the info. This gave me an idea for the next release of Oscam Launcher.

      • Mr M says:

        You are welcome!

        From the beginning oscam worked just a few minutes or seconds before it crashed.
        After using the oscam wrapper the channels themselves were stable but at channel changes the client (WinCSC) stopped receiving keys. Oscam was still running but seemed to have lost contact with the reader (Phoenix).
        After installing the PCI to USB card oscam has been perfectly (100%) stable for over one month now! Amazing!
        So I don`t want to solely blame oscam. Part of the problem can be bad quality cardreaders. Phoenix are pretty “shitty” quality, at least if you ask the the programmers that made NewCS.

  78. Mr xfighter says:

    I would like to report a bug in Oscam. Recent Oscam Version Especially After oscam-cygwin-svn-5898 fails to initialize newcamd readers or proxies like they are called in the web interface. I hope that you guys fix this in your next update. Please Use The Version oscam-cygwin-svn-5898 and use a newcamd reader protocol and use the last version to see the big difference in the connection… I hope that you identify the error and have it fixed in the coming version. As for now I am very satisfied with oscam-cygwin-svn-5898. In case you fixed the issue in your next version PLEASE LET ME KNOW…..

    Thank You Very Much For Your Amazing Efforts….

    • Build 5898 is months old. There was about 650 new builds after that. Have you tested any recent version. That issue is probably solved already.

      We @tekreaders are not the developers of Oscam. We just compile and distribute the windows binaries. Development is at http://streamboard.gmc.to:8001/timeline
      If you have feature requests or bug reports about the functionality of Oscam, then you should contact the development team.

      • Mr xfighter says:

        The problem I reported exists in all editions after build 5898! Am sorry that you can’t modify the code. Would you please refer me of how to appky for a bug report for the developing team….. Thanx a lot for your greast efforts

  79. Judas says:

    every version after 6445 doesnt work good with proxies :(. On Linux and windows. But 6445 i recomend if you have ubuntu 11.10 :=). Been runnig for 2 weeks no problem. But dont update because proxies will keep disconnecting and nds cards will send trash so screen bedcomes black after a few hours

  80. lolipop says:

    Why has there been no update since 3/21/2012 9:51?
    svn-6558 is old, the automated system must be updated.

  81. Daniel says:

    windows xp does close half-open- ports, when ten ports are exceeded. this it enhances to maximal 50. >> https://rapidshare.com/files/2832949587/tcp.reg

    sry for my bad english.

    • Daniel says:

      at to many ecm ask have closed xp my ports e.g 12000 for cccam and my users were offline. it’s came crash sometimes or i have to must restart oscam. this registry entry helped me.

  82. Micoo says:

    Hi, What happens to the automatic build process, It don’t work anymore?

  83. Hey guys, there is a problem with the build process.
    I will fix it ASAP.

  84. mark says:

    build #5237 is the only build that is stable for me….i am always trying the updates posted on the site only for them the crash after seconds….why is this happening with me..

  85. kbrause says:

    Very nice & helpful site => big THX
    I have question’s:
    On Windows is every a bit different…
    What are valid values for the “Device” on the protocol this works but the readers are rare!)> i can’t get /dev/USBx to working with me 🙁

    Is there a newer version as 6110 that have good response time for phisical readers…
    has every a recommendation for a good Reader (i have test the smargo 1.5. It’s a “Diva”)

  86. kbrause says:

    Sorry, my bad (have used html-tags)
    Very nice & helpful site => big THX
    I have question’s:
    On Windows is every a bit different…
    What are valid values for the “Device” on the protocol:
    mouse, smartreader, smargo (is there any more under windows? not PCSC = this works but the readers are rare!) i can’t get /dev/USBx to working with me 🙁

    Is there a newer version as 6110 that have good response time for phisical readers…
    has every a recommendation for a good Reader (i have test the smargo 1.5. It’s a “Diva”)

  87. fati says:

    Server turns off after 30 minutes (windows7)

  88. Flo77 says:

    Thank you fo the great website.
    I’m facing a problem form many version (since 2300 or so) which causes crashing oscam when client disconnects/get connected. So my oscam crashes many times a day. Build 7034 told something about fixing a crash on disconnecting clients, but did not solve my problem. Any suggestions? (oscam 7034 Cygwin on Server 2008 32 bit.
    Thanks,
    Florian

  89. amine says:

    hey
    can i use oscam to creat my server using my cline cccam

  90. furio says:

    having no luck after a whole day ,, read all posts SMARGO not working,

    tried list usb gettin 000:003 tried that in file and nothing,

    tried /dev/ttyS0 and so on,,

    wich is the correct way exactly to code the adress of my smargo ,, and or list it,

    12/06/12 02:33:23 1101AE8 r ERROR reader smargo opening device /dev/ttyS2 (errno=2 No such file or directory)

    heres my current file
    [reader]
    label = smargo
    enable = 1
    protocol = mouse
    device = /dev/ttyS2
    detect = cd
    mhz = 600
    cardmhz = 600
    caid = 0963
    ident = 0963:000000
    services =
    group = 1
    emmcache = 1,3,2
    lb_weight = 100
    cccreshare = 3
    audisabled = 0
    #boxid = xxxxxxxx
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown = 0

  91. Mr M says:

    I am only using oscam.exe 5500 to 5510 om my XP machine.because all newer versions I tested crashes almost immediately. This together with the oscam service wrapper and a PCI or PCI-E USB card makes my oscam server totally stable.

    Mr M

  92. Petter says:

    Updates stopped? Oscam is on buld 7062, you are on 7046.. 🙂

  93. WinOutR says:

    svn Working fine with SCM PCSC and Sky v13 Card

    Windows XP Timing: 450ms
    Windows 7 Timing with ins15=15 : 140ms

    I did nit understand the Problem about 300ms Latency but who cares… its working with PCSC Cardreader and NDS Cards with Freetz Oscam Proxy Reader

    Good Job

  94. hitman says:

    i have PCPC Omnikey, ECM 105 ms -400ms at 1 User v13, Caid 09C4
    AMD x64 with 2 CPU

    1 CPU Kern aktiviert für oscam.exe in Taskmanager/Zugerhörigkeit festlegen
    ECM Konstant 105ms …. 😀

    run Perfect with 1 CPU Kern

  95. krokoo says:

    I tried oscam on windows xp, but I get the following error message:

    2012/06/24 13:51:01 8D1288 r Wrong device format (/dev/ttyS3), it should be Device=bus:dev
    2012/06/24 13:51:01 8D1288 r Cannot open device: /dev/ttyS3

    How do I know the value of the bus and dev?
    Smargo smartreader + on COM4

    • kbrause says:

      Protocol = smartreader+ isn’t supported on XP
      device = /dev/USBx isn’t supported
      try:
      Protocol = mouse
      device = /dev/com4 # maximum com16 supported
      or
      device = /dev/ttyS3 # maximum ttyS255 supported

  96. palle says:

    WHICH VERSION IS STABLE

    oscam stable on xp ?

    CARD 0B00

    CARD 090F

    CARD 090E

    ??????????????????????????????????????????????????????????????????????????????

  97. palle says:

    sorry mean

    WHICH VERSION IS STABLE

    oscam stable on xp ?

    CARD 0B00

    CARD 090F

    CARD 093E

  98. Daniel says:

    version #6012 is stable

  99. pop1234 says:

    hello Hugo Rosário

    you can devlop Gbox for windows is opensource

    thx

  100. palle says:

    Daniel

    Thanks !

  101. Bernd says:

    Got follow error i dont know whats wrong here my logs:

    reader-0 [smartreader] Cannot open device: 001:002
    2012/07/16 12:53:39 D91700 r reader-0 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
    2012/07/16 12:53:39 D91700 r coulnd’t open device 001:002
    2012/07/16 12:53:39 D91700 r libusb_open unknown error : -12
    2012/07/16 12:53:39 D91700 r coulnd’t open device 001:004

  102. hybrid-box says:

    oscam-cygwin-svn-7191 Can support CAID: 4A02 Tongfang

    Logs file is OK why black screen?

    2012/07/24 21:06:02 8243E8 r gmm [mouse] ATR: 3B 6C 00 00 4E 54 49 43 32 0F B6 06 4A 03 00 00
    2012/07/24 21:06:03 8243E8 r gmm [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2012/07/24 21:06:04 8243E8 r gmm [mouse] Tongfang card detected
    2012/07/24 21:06:04 8243E8 r gmm [mouse] type: Tongfang, caid: 4A02, serial: ########, hex serial: ########, BoxID: ########
    2012/07/24 21:06:04 8243E8 r gmm [mouse] found cardsystem tongfang
    2012/07/24 21:06:04 8243E8 r gmm [tongfang] Provider:04b8
    2012/07/24 21:06:04 8243E8 r gmm [tongfang] Provider:0000
    2012/07/24 21:06:04 8243E8 r gmm [tongfang] Provider:0000
    2012/07/24 21:06:04 8243E8 r gmm [tongfang] Provider:0000
    2012/07/24 21:06:06 8263D0 c test1 (4A02&000000/0000/0003/64:1686): found (265 ms) by gmm
    2012/07/24 21:06:18 8263D0 c test1 (4A02&000000/0000/0003/64:D646): found (328 ms) by gmm
    2012/07/24 21:06:19 829C98 c test2 (4A02&000000/0000/000E/64:14AB): found (203 ms) by gmm

    • kbrause says:

      please have a look at the log of your client side (TV-Engine plugin)

      think it’s the decrytion-engine

      • spramote says:

        I have log from client it black screen

        2012/11/22 11:30:48 5F54C8 p gmmz [newcamd] connecting to 192.168.7.80:20008
        2012/11/22 11:30:48 5F54C8 p Newcamd Server: 192.168.7.80:20008 – UserID: 11
        2012/11/22 11:30:48 5F54C8 p CAID: 4A02 – UA: 0000000000000000 – Provider # 1
        2012/11/22 11:30:48 5F54C8 p Provider ID: 000000 – SA: 00000000
        2012/11/22 11:30:53 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:F049): timeout (5002 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:31:11 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:FBC7): found (1871 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:31:32 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:0868): found (1871 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:31:53 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:5DCB): found (1884 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:32:14 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:0DF3): found (1864 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:32:35 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:660E): found (1872 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:32:56 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:8667): found (1877 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:33:17 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:0471): found (1865 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:33:38 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:6911): found (1884 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:33:59 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:DE08): found (1873 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:34:20 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:2D42): found (1875 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:34:41 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:CF5F): found (1866 ms) by gmmz – 4A02:000F unknown
        2012/11/22 11:35:02 5FFB38 c dvbapiau (4A02&000000/0000/000F/64:E197): found (1871 ms) by gmmz – 4A02:000F unknown

        Please help for this case

  103. _ says:

    it looks like the streamboard site is down permantently now;

    I can’t read much German but it looks like the site continues at;
    http://streamboard.de.vu/

    Is it possible to investigate to see if the svn repository source for your builds can be changed?

  104. _ says:

    looks like the new timeline can be found here;
    http://streamboard.de.vu:8001/timeline

  105. ........ says:

    I have a problem, oscam crashes after some time, but i don’t know why. Does it matter that i use Win7 x86? Sometimes it crashes just after i start it (around 5-6 seconds)

  106. palle says:

    oscam.key location Windows PC ?

  107. Dvbuser says:

    Hi People,

    I am using a linux version of OSCAM with Smargo Smartreader with great success, but, for practical reasons I want to use it under Windows. After installing the latest windows version from tekreaders (#7247) under Cygwin and using the same configuration (except of course the COM/USB port) I cannot use it. OSCAM finds the card, reads ATR and after that nothing happens. It works under linux using the same settings…

    Any ideas?

    Thanks in advance.

    [reader]
    Label = Smargo
    Protocol = mouse
    Device = /dev/com3
    Fallback = 0
    Group = 1
    cardmhz = 357
    mhz = 357
    deprecated = 1

    [global]
    waitforcards = 1
    clienttimeout = 6000
    fallbacktimeout = 5000
    nice = -20
    serialreadertimeout = 1500

    8/12/2012 5:52:05 AM] – 05:52:04 0 s smargo [mouse] creating thread for device /dev/com3
    [8/12/2012 5:52:05 AM] – 05:52:04 0 s loadbalancer: can’t read from file /cygdrive/c/Users/ssjunior/AppData/Local/Temp/_oscam/stat
    [8/12/2012 5:52:05 AM] – 05:52:04 0 s waiting for local card init
    [8/12/2012 5:52:07 AM] – 05:52:07 1024A68 r smargo [mouse] Reader initialized (device=/dev/com3, detect=cd, mhz=357, cardmhz=357)
    [8/12/2012 5:52:07 AM] – 05:52:07 1024A68 r smargo [mouse] card detected
    [8/12/2012 5:52:15 AM] – 05:52:15 1024A68 r smargo [mouse] ATR: 3F ………
    [8/12/2012 5:52:16 AM] – 05:52:16 1024A68 r smargo [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    [8/12/2012 5:52:19 AM] – 05:52:18 1024A68 r smargo [mouse] detect native nagra card
    [8/12/2012 5:52:21 AM] – 05:52:21 1024A68 r smargo [mouse] T1 Resync command error, trying to reactivate!
    [8/12/2012 5:52:29 AM] – 05:52:29 1024A68 r smargo [mouse] ATR: 3F ………..
    [8/12/2012 5:52:31 AM] – 05:52:30 1024A68 r smargo [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    [8/12/2012 5:52:34 AM] – 05:52:34 1024A68 r smargo [mouse] T1 Resync command error, trying to reactivate!
    [8/12/2012 5:52:42 AM] – 05:52:42 1024A68 r smargo [mouse] ATR: 3F ………..
    [8/12/2012 5:52:44 AM] – 05:52:44 1024A68 r smargo [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    [8/12/2012 5:52:45 AM] – 05:52:45 1024A68 r smargo [mouse] card system not supported
    [8/12/2012 5:52:45 AM] – 05:52:45 1024A68 r smargo [mouse] card initializing error

  108. Mickeez says:

    First of all, Thanks Hugo for your good job with the windows build system for OsCam, I can promise you that we are many people their out that are very grateful for your perfect service.

    No to the problem, It’s the automatic build process broken? No new builds on a couple of days?

  109. Fra298 says:

    Whic release is the best one under win7 X64?
    Here, it seems all releases after 6170 are not working properly… did i make something wrong ?

  110. Judas says:

    If you have nds cards dont download 7266. Will not load entitlements in win or linux. Just error

  111. ___ says:

    Builds after 7266 seem to be giving an error about a missing cygusb-1.0.dll
    Can this file perhaps be included in the cygwin rar file as I can’t find it.
    thanks

  112. stargate says:

    Hi,

    i have the same problem there is an Error of a missing cygusb-1.0.dll can you include this file in the cygwin.rar ?

  113. stargate says:

    Hi,

    i have another problem oscam did detect the false Baudrate.. in my USB setting i have 9600 but Oscam shows 80645 how can i change that ?

    • kbrause says:

      you are out off standard 357, 368, 600… and isn’t match the hardware reader!!

      set server-config the same frequency as that on the reader (e.g. 3.68 == 368)

  114. I have updated the cygwin DLL package and included cygusb-1.0.dll.
    It should work with the latest versions.

    Thank you.

    • ___ says:

      great thanks – working perfectly now.
      a question for all… I’ve been using Omnikey 3121 reader from more than a year and it’s been bomb proof. I’ve recently got a smargo plus reader.in the hopes of reducing response times frorm the smart card. Has anyone had solid stability under Windows with the smargo as initial tests I ran saw the oscam process dropping out every few minutes. I did however see response times of about 100ms (only after overclocking to 600mhz) compared to about 150ms on the Omnikey.when it was working.

  115. ___ says:

    Hugo, looks like the build process has stuck on 7289. Would be great if you could take a look. thanks.

  116. Hans says:

    Hi Hugo,

    just sent you an email for some hours ago. To: webmaster@tekreaders.com

    Cheers

  117. BTN says:

    I am having a problema, i installed this version os oscam with the oscam launcher, and i have deactivated the windows Firewall, but my clients (peers) cannot connect to my oscam, i am using the Windows 7 Starter, please can enyone help me please??!!

    Thanks

  118. palle says:

    If someone runs out newcam with oscam and find that it works 100%
    Please write what version you are running.
    you want to find a version that does not stop but just goes and goes.

    System 0B00, 090F

    I thank you in advance !

  119. Judas says:

    palle use windows version 5898 :=). Or in linux 6445. Versions after that are no good

  120. sumo says:

    Hi
    I have a bit problem with my oscam for window
    I’m now using oscam V.1.20 # 7365 with Window XP and smartgo reader, the problem is LB value/reader time is too high(at lease 1200ms) but if I use oscam for linux it’s about 150-200ms,please advise

    [22/9/2012 22:22:58] – 22:22:58 852B60 c chinaboyvtc10 (0640&000000/0004/0328/34:E5D5): found (1283 ms) by vtc
    [22/9/2012 22:23:00] – 22:22:59 81EA68 c chinaboyvtc08 (0640&000000/0004/0329/34:1A9D): found (2546 ms) by vtc
    [22/9/2012 22:23:01] – 22:23:01 81CB20 c chinaboyvtc05 (0640&000000/0004/0322/34:F822): found (3608 ms) by vtc
    [22/9/2012 22:23:02] – 22:23:02 848698 c chinaboyvtc09 (0640&000000/0001/001F/34:C88C): found (4369 ms) by vtc

  121. useronthenet says:

    For a while now I have been examining encryption systems, anyway I was given recently a nice piece of sw for emulation which is a (non-public) private version of OScam Mipsel emu build #6418 i2 Maybe you are famiiar with the sw in so much that you can add extra parameters which fully utilises and correctly emuluates the i2 system. Unfortunately nobody has given a signature check on the author so I am unable to activate the sw as it requires a licence which I am willing to pay for since some effort went into producing this nice piece of software. I have asked a few places which are classed as underground forums but it seems not many know about this sw.

    Anyway if you can help would be much appreciated

    Thanks

    • I do not have any information about this modification of Oscam.
      I provide only the binaries compiled from the oficial oscam SVN and make no modifications.
      As for your question, I think you should search the web for Oscam_ymod which I believe supports the i2 protocol.
      This mod is described like this :


      OSCam_ymod is a special version of OSCam developed by yuriks.
      OSCam_ymod is the emu version of OSCam
      i.e. it can read softcam.key ( It should be renamed as oscam.keys)
      It can handle Clines without problems.
      OSCam_ymod = CCCam + good Emu support ( I2 is ok )

  122. kbrause says:

    Hm…
    [quote]
    Originally Posted by some888
    I’m warning every user who wants to use Oscam Ymod.
    Author (yuriks) is keeping a changed source code for himself only and releasing only compiled versions of his ymod….
    there is a serious reason to believe Backdoor presence in ymod

    use it only offline (as emulator) ….. even there is next to nothing emulate this days
    NEVER use it for cardsharing….. unless you want your lines to be stolen

    thanks
    What you mean my friend. I hear that yuriks is made big cacheex server with this oscam. He stolen the cache from members and may be sell it to others. I also agree with some888 ymod is ok only for offline mode.
    [/quote]

  123. Dr.Source says:

    The build process is fully automated and new revisions are checked every 30 minutes. ?? the check is lost at trace… maybe?
    You can check the version changelog at http://streamboard.de.vu:8001/timeline.
    If the build process seems to have any problems, please leave a comment below and I will fix it. >I do it..
    oscam-cygwin-svn-7518.zip 416.8 KB 9/27/2012 5:48 pm

    30.09.2012 | 00:20 > `source: @ 7538` is the latest better make a guide/tutorial “how to build oscam in gycwin”…. don`t lie the ppl.

    • Thanks for lettting me know the build process was not working, I appreciate that.
      I have fixed the build server and it should be working again.
      I don´t need to make any tutorial about compiling oscam under cygwin because it´s exactly the same as building in any *nix system and you have a tutorial for that on the oscam wiki.

      http://www.streamboard.tv/oscam/wiki/BuildingOscam

      You seem angry and I will just ignore the fact your are calling me a liar just because I do my best at giving people oscam windows binaries and I do not even use Oscam on windows. I just do it because nobody else seems to be doing it and I like open source software and use my knowledge to make a contribution to the oscam users. If you don´t like my work just don´t use it and compile your own.

      • Dr.Source says:

        sry if ur mad ;d , and yes i was engry becouse i really need it the last version but i found on oscam-wiki eclips+cygwin after 2h triyng for build on the 3th was ready. i respect your work…anyway just forget it 😉

  124. hdmm says:

    thank you for your work
    here is my problem
    2012/10/14 08:09:22 12A4318 c user1 disconnected from xxxxip
    2012/10/14 08:09:38 12A4318 c encrypted cccam-client xxxiprejected (user1, invalid ip)
    2012/10/14 08:09:38 12A4318 c password for ‘user1’ invalid!
    2012/10/14 08:09:38 12A4318 cuser1disconnected from xxxxxxxxxxxxxx
    2012/10/14 08:09:54 12A4318 c encrypted cccam-client xuser1rejected (user1 , invalid ip)
    2012/10/14 08:09:54 12A4318 c password for ‘mxxxxxxxxxxxxxxx’ invalid!
    2012/10/14 08:09:54 12A4318 c xxxxxxxxxxxxxx disconnected from xxxxxxxxxxx
    2012/10/14 08:10:11 12A4318 c encrypted cccam-client xxxxxxxxxxxx rejected (user1, invalid ip)
    2012/10/14 08:10:11 12A4318 c password for ‘user 1’ invalid!
    2012/10/14 08:10:11 12A4318 c xxxxxxxxxxxxxxxdisconnected from xxxxxxxxxxxxxx

  125. Dunk says:

    I can run two oscam instances in windows?

  126. enigma13 says:

    I have a problem since version 7741 with infinity usb smart in module setting.

    Under win7 64 bits, computer hangs, no more mouse, keyboard, ctrl alt sup ..
    Under win7 32 bits, i get a message before windows closes :

    infinity [mouse] card detected
    2 [unknown (0x6C4)] oscam 2268 _cygtls::handle_exceptions: Error while dumping state (probably corrupted stack) geschockt

    Before version 7741, all version works like a charm.
    I have installed latest dlls, including cygusb-1.0.dll

  127. Nic says:

    Are there any archive to get hold of recent windows version, for example I see that someone suggest to go for no newer that build 5898 for windows. Thx for a great job

  128. GodBotherer says:

    If you are having problems with oscam crashing all the time in Windows 7 64-bit, you might wanna try some newer cygwin libraries.
    I was getting stackdumps with STATUS_ACCESS_VIOLATION all the time, and I finally suspected Cygwin to be the problem.
    Don’t get the DLLs from this site (at least not until they get updated), and instead install Cygwin separately. That worked wonders for me. I haven’t had a crash yet after this.

    Download setup.exe from cygwin.com (at the time of writing this, the latest version was 1.7.17-1)
    Install it with default settings, but you need to manually enable the following two additional packages (click the “skip” text to change the version to install):
    Libs –> “libusb 1.0” (I chose 1.0.8+git20110720-1)
    Libs –> “libopenssl098” (0.9.8x-1 was the only one avaliable)

    After installation you will have the 4 required dlls (and a whole lot more) in your c:\cygwin\bin folder.
    You can probably deselect most of the default packages, but I didn’t bother.

    The files seem to be much newer versions of the ones from this site. These are the timestamps on my files:

    cygwin1.dll 2012-10-19 14:40
    cyggcc_s-1.dll 2011-10-26 06:26
    cygusb-1.0.dll 2011-08-16 22:45
    cygcrypto-0.9.8.dll 2012-05-11 13:34

    Don’t forget to add the c:\cygwin\bin to your PATH system environment variable and reboot.
    Also make sure you delete any cygwin DLLs in your oscam directory (or other places). If you have set the PATH environment variable correctly, then you don’t need the DLLs in the same directory as oscam.

    Nice work on the OSCAM launcher by the way – very useful tool indeed 🙂

    • Thank you very much your contribution.
      I will update the dlls available for download.

    • Jocke says:

      Thank you for this!

      I have the exact same problem with the STATUS_ACCESS_VIOLATION.
      I am trying to follow your tips here but when i add the c:\cygwin\bin to your PATH system environment variable and reboot and try to start Oscam i get an error message saying that the “cygcrypto-0.9.8.dll” is missing from my computer… Any idea what I am doing wrong?
      When I try to just copy the files in to the Oscam folder only one of my card readers work so i guess that is not the way to do it…?

      Thank you in advance for your help!

  129. hypa says:

    hi i am using win7 64bit somehow when i put in rsa key and boxkey for nagra 3 using oscam webserver i cannot get keys save under reader settings whenever i click on save it always appear blank and if i manually add in oscam server file it is save there but still dont c it under reader settings i am using build#7884

  130. enigma13 says:

    My crash problem is now fixed with ticket http://www.streamboard.tv/oscam/ticket/2926
    I would now compile by myself the svn, or try to do it more exactly.
    Your build method is via Cygwin Terminal or Eclipse ?

  131. spramote says:

    Please the log it show ecm ok

    [11/16/2012 1:03:30 AM] – Starting “oscam.exe”…
    [11/16/2012 1:03:30 AM] – Oscam is running!
    [11/16/2012 1:03:30 AM] – Next restart at 11/16/2012 6:00:00 AM
    [11/16/2012 1:03:30 AM] – 01:03:30 0 s starting thread log_list_thread
    [11/16/2012 1:03:31 AM] – 01:03:30 0 s log_list_thread thread started
    [11/16/2012 1:03:31 AM] – 01:03:30 0 s >> OSCam < CAID: 4A02 PROVID: 000000
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s Starting listener 0
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s cccam: initialized (fd=4, port=15005, crypted)
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s Starting listener 0
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s pandora: disabled
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s Starting listener 0
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s csp: disabled
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s Starting listener 0
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s radegast: disabled
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s starting thread http
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s http thread started
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s starting thread reader check
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s reader check thread started
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s starting thread check
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s check thread started
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s reader-1 [mouse] creating thread for device /dev/com1
    [11/16/2012 1:03:31 AM] – 01:03:31 8321D8 h HTTP Server listening on port 8080
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s loadbalancer: can’t read from file /cygdrive/c/DOCUME~1/it/LOCALS~1/Temp/_oscam/stat
    [11/16/2012 1:03:31 AM] – 01:03:31 0 s waiting for local card init
    [11/16/2012 1:03:31 AM] – 01:03:31 8356F8 r reader-1 [mouse] Reader initialized (device=/dev/com1, detect=cd, mhz=500, cardmhz=357)
    [11/16/2012 1:03:32 AM] – 01:03:32 8356F8 r reader-1 [mouse] card detected
    [11/16/2012 1:03:33 AM] – 01:03:33 8356F8 r reader-1 [mouse] ATR: 3B 6C 00 00 4E 54 49 43 32 F9 B0 06 4A 03 00 00
    [11/16/2012 1:03:33 AM] – 01:03:33 8356F8 r reader-1 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
    [11/16/2012 1:03:33 AM] – 01:03:33 8356F8 r reader-1 [mouse] Setting baudrate to 9600 bps
    [11/16/2012 1:03:33 AM] – 01:03:33 8356F8 r reader-1 [mouse] Calculated work ETU is 74.40 us
    [11/16/2012 1:03:33 AM] – 01:03:33 8356F8 r reader-1 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 5.00 Mhz (specified in reader->mhz)
    [11/16/2012 1:03:34 AM] – 01:03:34 8356F8 r reader-1 [mouse] Tongfang card detected
    [11/16/2012 1:03:35 AM] – 01:03:35 8356F8 r reader-1 [mouse] type: Tongfang, caid: 4A02, serial: ########, hex serial: ########, BoxID: ########
    [11/16/2012 1:03:35 AM] – 01:03:35 8356F8 r reader-1 [mouse] found card system tongfang
    [11/16/2012 1:03:35 AM] – 01:03:35 8356F8 r reader-1 [tongfang] Provider:04b8
    [11/16/2012 1:03:35 AM] – 01:03:35 8356F8 r reader-1 [tongfang] Provider:0000
    [11/16/2012 1:03:36 AM] – 01:03:36 0 — Skipped 2 duplicated log lines —
    [11/16/2012 1:03:36 AM] – 01:03:36 0 s init for all local cards done
    [11/16/2012 1:03:36 AM] – 01:03:36 0 s anti cascading disabled
    [11/16/2012 1:03:36 AM] – 01:03:36 836F90 c client connected to 20008 port
    [11/16/2012 1:03:38 AM] – 01:03:38 836F90 c Connection closed to client
    [11/16/2012 1:03:38 AM] – 01:03:38 836F90 c anonymous disconnected from 192.168.7.101
    [11/16/2012 1:03:40 AM] – 01:03:40 838760 c client connected to 20008 port
    [11/16/2012 1:03:41 AM] – 01:03:40 838760 c encrypted newcamd:20008-client 192.168.7.101 granted (test1, au=on (1 reader))
    [11/16/2012 1:03:41 AM] – 01:03:40 838760 c user test1 authenticated successfully (mgcamd)
    [11/16/2012 1:03:41 AM] – 01:03:40 838760 c emm for reader reader-1 (4A02) has no provider
    [11/16/2012 1:03:41 AM] – 01:03:40 838760 c AU enabled for user test1 on reader reader-1
    [11/16/2012 1:03:41 AM] – 01:03:41 838760 c SID list will not be send to mgcamd client.
    [11/16/2012 1:03:43 AM] – 01:03:43 838760 c test1 (4A02&000000/0000/000C/64:67F6): found (1783 ms) by reader-1
    [11/16/2012 1:03:55 AM] – 01:03:55 838760 c test1 (4A02&000000/0000/000C/64:961B): found (1791 ms) by reader-1

    why it show blcam screen

  132. hypa says:

    i still cant save rsakeys under the heading reader general settings , im using win7 64bit, oscam version#7934 when i input info does not save

  133. hypa says:

    working now saw my error thx

  134. Innovator says:

    Just to let you know 7591 working on windows 8 enterprise.

  135. Tom says:

    Hello friends, I’m from Brazil and here Sky is using the card GL54 and still can not read this card, we can only use the gl34 and this does not have HD channels. I would like to ask for help and even pay for someone to help me. – email and msn daltonymunhoz@hotmail.com

    Version used:

    OSCam cardserver v1.00-unstable_svn, build #5491 (i586-pc-linux) – (w) 2009-2011 Streamboard SVN
    ———————————————————————————————————————–

    Log: oscam running with -d 255

    —-
    ——————————————————————————-
    >> OSCam <> OSCam << cardserver started, version 1.00-unstable_svn, build #5491 (i586-pc-linux)
    2012/12/31 8:58:42 LALALALAL s version=1.00-unstable_svn, build #5491, system=i586-pc-linux, nice=-1
    2012/12/31 8:58:42 LALALALAL s client max. idle=120 sec, debug level=255
    2012/12/31 8:58:42 LALALALAL s max. logsize=300 Kb, loghistorysize=4096 bytes
    2012/12/31 8:58:42 LALALALAL s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=150 ms
    2012/12/31 8:58:42 LALALALAL s share updater thread started
    2012/12/31 8:58:42 LALALALAL s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2012/12/31 8:58:42 LALALALAL s reader 'glb-recife' provid filter(s):
    2012/12/31 8:58:42 LALALALAL s CAID #0: 0907
    2012/12/31 8:58:42 LALALALAL s provid #0: 000000
    2012/12/31 8:58:42 LALALALAL s user 'tomteste' provid filter(s):
    2012/12/31 8:58:42 LALALALAL s CAID #0: 0907
    2012/12/31 8:58:42 LALALALAL s provid #0: 000000
    2012/12/31 8:58:42 LALALALAL s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2012/12/31 8:58:42 LALALALAL s signal handling initialized (type=sysv)
    2012/12/31 8:58:42 LALALALAL s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
    2012/12/31 8:58:42 LALALALAL s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    2012/12/31 8:58:42 LALALALAL s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    2012/12/31 8:58:42 LALALALAL s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
    2012/12/31 8:58:42 LALALALAL s monitor: disabled
    2012/12/31 8:58:42 LALALALAL s camd33: disabled
    2012/12/31 8:58:42 LALALALAL s camd35: disabled
    2012/12/31 8:58:42 LALALALAL s cs378x: disabled
    2012/12/31 8:58:42 LALALALAL s newcamd: initialized (fd=7, port=15000, crypted)
    2012/12/31 8:58:42 LALALALAL s CAID: 0907
    2012/12/31 8:58:42 LALALALAL s provid #0: 000000
    2012/12/31 8:58:42 LALALALAL s radegast: disabled
    2012/12/31 8:58:42 LALALALAL s http disabled
    2012/12/31 8:58:42 LALALALAL s creating thread for device 0
    2012/12/31 8:58:42 LALALALAL s loadbalancer: can't read from file /tmp/.oscam/stat
    2012/12/31 8:58:42 LALALALAL s waiting for local card init
    2012/12/31 8:58:42 LALALALAL r reader thread started (thread=LALALALAL, label=glb-recife, device=0, detect=cd, mhz=357, cardmhz=357)
    2012/12/31 8:58:42 LALALALAL r IFD: Opening device 0

    2012/12/31 8:58:42 LALALALAL r PCSC establish context for PCSC reader 0
    2012/12/31 8:58:42 LALALALAL r PCSC reader 0: OmniKey CardMan 3121 00 00
    2012/12/31 8:58:42 0 share-updater mode=initfast t=1s i=30
    2012/12/31 8:58:43 LALALALAL r glb-recife card detected
    2012/12/31 8:58:43 LALALALAL r IFD: Activating card in reader glb-recife

    2012/12/31 8:58:43 LALALALAL r PCSC initializing card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:43 LALALALAL r PCSC resetting card in (OmniKey CardMan 3121 00 00) with handle 71865
    2012/12/31 8:58:43 LALALALAL r PCSC resetting done on card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:43 LALALALAL r PCSC Protocol (T=0)
    2012/12/31 8:58:43 LALALALAL r PCSC getting ATR for card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:43 LALALALAL r PCSC Protocol (T=0)
    2012/12/31 8:58:43 LALALALAL r glb-recife ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
    2012/12/31 8:58:43 0 share-update [1] 3108616668 0
    2012/12/31 8:58:43 0 s-card added: id 0 remoteid 10000 caid 907 hop 0 reshare 10 originid 0 cardtype 1
    2012/12/31 8:58:43 0 reported/updated +1/-0/dup 0 of 1 cards to sharelist
    2012/12/31 8:58:43 0 share-updater mode=initfast t=1s i=30
    2012/12/31 8:58:44 LALALALAL r [videoguard2-reader] passed history check
    2012/12/31 8:58:44 LALALALAL r [videoguard2-reader] type: VideoGuard Sky Brasil GL54 (0943), baseyear: 2009
    2012/12/31 8:58:44 LALALALAL r write to cardreader glb-recife:
    2012/12/31 8:58:44 LALALALAL D0 74 01 80 01
    2012/12/31 8:58:44 LALALALAL r sending 5 bytes to PCSC : D0 74 01 80 01
    2012/12/31 8:58:44 0 share-updater mode=initfast t=1s i=29
    2012/12/31 8:58:45 LALALALAL r received 0 bytes from PCSC with rv=80100016 :
    2012/12/31 8:58:45 LALALALAL r PCSC doapi (80100016 ) (T=0), 0
    2012/12/31 8:58:45 LALALALAL r [videoguard-reader] failed to read 7401 cmd length (00 00)
    2012/12/31 8:58:45 LALALALAL r [videoguard12-reader] passed history check
    2012/12/31 8:58:45 LALALALAL r card system not supported
    2012/12/31 8:58:45 LALALALAL r Normal mode failed, reverting to Deprecated Mode
    2012/12/31 8:58:45 LALALALAL r IFD: Activating card in reader glb-recife

    2012/12/31 8:58:45 LALALALAL r PCSC initializing card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:45 LALALALAL r PCSC resetting card in (OmniKey CardMan 3121 00 00) with handle 71865
    2012/12/31 8:58:45 LALALALAL r PCSC resetting done on card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:45 LALALALAL r PCSC Protocol (T=0)
    2012/12/31 8:58:45 LALALALAL r PCSC getting ATR for card in (OmniKey CardMan 3121 00 00)
    2012/12/31 8:58:45 LALALALAL r PCSC Protocol (T=0)
    2012/12/31 8:58:45 LALALALAL r glb-recife ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 47 4C 05
    2012/12/31 8:58:45 0 share-updater mode=initfast t=1s i=28
    2012/12/31 8:58:46 LALALALAL r [videoguard2-reader] passed history check
    2012/12/31 8:58:46 LALALALAL r [videoguard2-reader] type: VideoGuard Sky Brasil GL54 (0943), baseyear: 2009
    2012/12/31 8:58:46 LALALALAL r write to cardreader glb-recife:
    2012/12/31 8:58:46 LALALALAL D0 74 01 80 01
    2012/12/31 8:58:46 LALALALAL r sending 5 bytes to PCSC : D0 74 01 80 01
    2012/12/31 8:58:46 0 share-updater mode=initfast t=1s i=27
    2012/12/31 8:58:47 LALALALAL r received 0 bytes from PCSC with rv=80100016 :
    2012/12/31 8:58:47 LALALALAL r PCSC doapi (80100016 ) (T=0), 0
    2012/12/31 8:58:47 LALALALAL r [videoguard-reader] failed to read 7401 cmd length (00 00)
    2012/12/31 8:58:47 LALALALAL r [videoguard12-reader] passed history check
    2012/12/31 8:58:47 LALALALAL r card system not supported
    2012/12/31 8:58:47 LALALALAL r card initializing error
    2012/12/31 8:58:47 0 share-update [1] 2242384826 3108616668
    2012/12/31 8:58:47 0 reported/updated +0/-0/dup 0 of 1 cards to sharelist
    2012/12/31 8:58:47 0 share-updater mode=initfast t=1s i=30
    2012/12/31 8:58:48 LALALALAL s init for all local cards done
    2012/12/31 8:58:48 LALALALAL s anti cascading disabled
    2012/12/31 8:58:48 0 share-updater mode=initfast t=1s i=29
    2012/12/31 8:58:49 0 share-updater mode=initfast t=1s i=28
    2012/12/31 8:58:50 0 share-updater mode=initfast t=1s i=27
    2012/12/31 8:58:51 LALALALAL s thread LALALALAL exit with signal 2

  136. sqwt says:

    i have 2 cards, that can decrypt the same channels. Several users that send ECM requests on the same time.
    User 1 –> ECM request send to card 1
    User 2 –> ECM request send to card 2
    User 3 –> ECM request send to card 1
    User 4 –> ECM request send to card 2
    User 5 –> ECM request send to card 1
    User 1 –> ECM request send to card 2
    User 2 –> ECM request send to card 1

    how to configure in oscam.conf & oscam.server?
    ths

  137. Henrik says:

    Hi
    Is it possible to show the cache hits in the log or in the Launcher?
    Or is it just cache hits with LTIME = 0 that are note shown?

    BR
    Henrik

    • Henrik says:

      If I change Cache Delay to something else than 0, then the cache hits are shown in the log.
      Change Cache Delay to 1
      [2013-01-11 00:17:53] – 00:17:53 863A58 c Season (0500&040D00/0000/0000/3F:BA4F98026774F197041BF4DDAF4E4B7F): found (275 ms) by omnikey –
      [2013-01-11 00:17:53] – 00:17:53 859568 c AlexCS (0500&040D00/0000/0000/3F:BA4F98026774F197041BF4DDAF4E4B7F): cache1 (16 ms) by omnikey –
      [2013-01-11 00:18:13] – 00:18:13 863A58 c Season (0500&040D00/0000/0000/3F:7DD288932A260622D0D6200798FF6AEE): found (276 ms) by omnikey –
      [2013-01-11 00:18:13] – 00:18:13 859568 c AlexCS (0500&040D00/0000/0000/3F:7DD288932A260622D0D6200798FF6AEE): cache1 (16 ms) by omnikey –
      [2013-01-11 00:18:33] – 00:18:33 863A58 c Season (0500&040D00/0000/0000/3F:E6B2B1747ADFACF31C65BCA13E9351D0): found (277 ms) by omnikey –
      [2013-01-11 00:18:33] – 00:18:33 859568 c AlexCS (0500&040D00/0000/0000/3F:E6B2B1747ADFACF31C65BCA13E9351D0): cache1 (15 ms) by omnikey –
      [2013-01-11 00:18:53] – 00:18:53 863A58 c Season (0500&040D00/0000/0000/3F:5B616278581B60DED1BA513B2FBB9A76): found (276 ms) by omnikey –
      [2013-01-11 00:18:53] – 00:18:53 859568 c AlexCS (0500&040D00/0000/0000/3F:5B616278581B60DED1BA513B2FBB9A76): cache1 (15 ms) by omnikey –
      [2013-01-11 00:19:05] – 00:19:05 852DD0 h Refresh Server requested by WebIF from 127.0.0.1 | Changed back Cache Delay to 0
      [2013-01-11 00:19:13] – 00:19:12 863A58 c Season (0500&040D00/0000/0000/3F:63BEE37DE6051F064AEA9E536D6CBFAD): found (275 ms) by omnikey –
      [2013-01-11 00:19:33] – 00:19:33 863A58 c Season (0500&040D00/0000/0000/3F:A5A6D310F1F472E3C836429959B07F5D): found (277 ms) by omnikey –
      [2013-01-11 00:19:53] – 00:19:53 863A58 c Season (0500&040D00/0000/0000/3F:158EB5E5E45FED1929CFA2EA44C03CD9): found (276 ms) by omnikey –
      [2013-01-11 00:20:13] – 00:20:13 863A58 c Season (0500&040D00/0000/0000/3F:42D25B79B1C514D92B98AA84A6A5003F): found (277 ms) by omnikey –

  138. radical says:

    Could someone start the compile process again?

  139. donjuan says:

    How can I decrypt biss channels with constant.cw file in windows?
    How will I add the pah in reader file?

    device = ?

    Please help if this is possible in windows.

    And the other question is, do I have to add the caids for a cccam server in oscam?

  140. heisenberg says:

    Perfect work

    BIG THX

  141. Micku says:

    Very Good work, but are the autocompiler down because the newest version that is compiled is 8119 and the last version should be 8142?

    Thanks

  142. daniel says:

    hi.

    why does oscam not work with 2 same card with same caid?
    its just shuts down after 5 min..

  143. radical says:

    Sorry to asking again, but could someone start the compile process again?

  144. enigma13 says:

    To compile under cygwin:
    download it : http://cygwin.com/install.html
    add packages :
    *cmake
    *gcc4-core
    *gcc4-g++
    *libusb1.0
    *libusb1.0-devel
    *make
    *openssl-devel
    *subversion

    lunch it, then get the oscam source code :
    svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn

    then “cd oscam”
    then type “make cygwin”
    that’s it.

    ##################################

    But important note to the maker of this windows version from Tekreader :
    I have try to compile with “make cygwin USE_PCSC=1” but DIDEN’T WORK !!!
    How do you compile with PCSC support ?

    ##################################

    • I can´t remember exactly what I did when I had set up my cygwin enviroment, but I believe I had to install libpcsclite in order to allow PCSC support for Oscam.
      I will download and install the latest version of cygwin and try to reproduce the enviroment and will let you know how it´s done.

      • PeterS says:

        Hi Hugo,

        Did you manage to reproduce the environment for Cygwin PCSC support ?

        If so, i’d be interested in how you got it working

        Thanks

      • Peter Chávez says:

        Hey,

        it would be wonderful if you could provide information for the setup pcsc support on cygwin. I’m nearly there 🙂

        Thanks and have a good time

        Peter

  145. andy says:

    oscam wont work on any windows.. tryied over a 100 times.. it can run for 5 min 12 hours 2 sec. shitty fucking program.. news works like its suppose to..

    • andy says:

      no help is there out there.. if some one got it to work on windows let me know how..

    • If you need stability please do not use windows as oscam server.
      Consider installing linux, it will improve stability alot.

      I don´t use Oscam on windows, so I cannot help much about the stability issues.

      • enigma13 says:

        Thanks a lot Hugo ;), yes please let me know how to setup for pcsc and windows. Normally you can have access to my e-mail ?
        Concerning other point, no problem for stability , works 100% on win 7 – 64 bits, hugo’s one or mine compiled ;).
        To Andy: please post in the correct section on streamboard, perhaps somebody will help you 😉

  146. Micku says:

    Very Good work, but are the autocompiler down because the newest version that is compiled is 8282 and the last version should be 8324?

    Thanks man…

  147. david says:

    Hi,
    I also want to know to compile oscam under cygwin with pcsc support

  148. enigma13 says:

    I’ve open a tread here: http://www.streamboard.tv/wbb2/thread.php?threadid=35909
    But best solution is Hugo give us the method

  149. GNELL says:

    Judas: Last experiences? I see a early post from you stating that 5888 is best, and later 5898. Which one is currently the best?

    • FC says:

      The version for Windows 5898 with receiver Fta for me is the most stable?

      I have 3 lines cccam newcamd +1 line and works with 90% OSCAM Launcher, no freezes or stops.

      It has a small but, the provider 1702, +0500:032830 +0500:04270 not open any channel, but the same lines with the program opens Hdvb all.

      I’ve tried several versions but unsuccessfully possibly be misconfiguration in OSCAM.

      Anyway a great job of Hugo Rosary in OSCAM Launcher.

  150. Lujo says:

    It seems that building process is not working anymore. Can you fix?

  151. FC says:

    Hello Hugo

    In the next OSCAM Launcher configuration settings, be possible to give priority providers that want?

    Thanks

  152. Hans Müller says:

    Hey thanks for the great compile. Can you fix the building process? It seems not to work anymore.

    Greetz Hans

  153. Hans Müller says:

    Hey,

    would oscam run smoother if runnning under cygwin 1.7.17-1?(have some connection lags under win server 2008). But you have to compile it under this version in order to run..right? just a question.

    Thanky you, Hans

  154. kbrause says:

    All Version above 8562 has a CPU use off 25% (4 core CPU) on “nothing” todo
    is there a bug??

  155. Sjakko says:

    @ kbrause: same problem here. 8562 is OK but from 8563 and up (currently 8576) Oscam uses 50% of my core 2 duo CPU (e8400).

  156. oscamtester says:

    I tested many versions here but only 5237 build is stable for me (windows xp sp3, omnikey 3121 USB).
    did you find other one stable ??

    • kbrause says:

      7518 work 8 monthes without hangs (XP SP3 with OK3121)

    • DragonQ says:

      I still use 1.10 RC svn6089. All versions since then (1.20 unstable) seem to increase the time it takes to find ECMs, introducing decryption errors occasionally. I guess it might be due to the logging level or the fact that it’s still marked “unstable”. Using Windows Server 2012 though.

      • lujo says:

        Where can I find 1.10 RC svn6089. In archive there I can only find svn6090.
        Can you please upload svn6089 on file sharing site?

      • kbrause says:

        Sorry you are wrong!
        The branch 1.10 is closed and maintenance was closed: so the SVN label ist ‘stable’. at compile this build you get the label 1.10 RC xxxx
        the branch 1.20 is open so you get the label ‘unstable’
        if you have compiled build 6089 when the branch was open so you get a executable with label 1.10 unstable snv6089 and when you compile now, you get the label 1.10 RC svn6089 (i have both versions)
        build 6089 isn’t stable!!! it’s only labeled ‘RC’

  157. haav says:

    @ kbrause: same here.R8576 uses 25% of my quad core CPU even when OSCAM is unloaded.
    R8560 is OK.

  158. kbrause says:

    compile ‘hangs’ since 3/26/2013 2:18 am

  159. Lujo says:

    Does anybody know do I need to use VCP or D2XX drivers when using Smargo Smartreader Plus?
    http://www.ftdichip.com/FTDrivers.htm

  160. FC says:

    Can someone tell me a version that can open these 2 providers: 0500:032830 +0500:042700.
    For with the same lines that I have in another program (HDVB) can open the same providers.
    I’ve tried several versions without success
    Thanks

    • kbrausew says:

      see http://www.streamboard.tv/oscam/wiki/CardsList both are with the news version are ok

      • FC says:

        @Kbrausew
        The problem is that in caid:0500:032830,tries to open with the caid 1811,1812 ? AND in caid:0500:042700,tries to open with the caid 0628? Must be missing some configuration qe I am not in Oscam?.
        Thanks

        • kbrause says:

          you must configure preferences in you client
          e.g. you use ACAMD you need P-Lines in ACamd_PMT.txt:
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          P:0500:032830
          P:0500:042700
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          for other clients you must seach for a preference solution

  161. kbrause says:

    you must configure preferences in you client
    e.g. you use ACAMD you need P-Lines in ACamd_PMT.txt:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    P:0500:032830
    P:0500:042700
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    for other clients you must seach for a preference solution

    • FC says:

      Thanks for answering.
      So this is, I have a FTA receiver with sssp working with oscam version 5898 and Oscam Launcher.
      Has no freezes or stops working at 100%, if I can explain works with Acamd thank, because I had never heard of.

      Thanks

      • kbrause says:

        …FTA receiver with sssp…
        Is this a Windows system? or have you a extra win-oscam-server connect to you STB?


        You must search for your receiver’s client (softcam-plugin…) to configure a “preference” or have a “multicam”-parameter

        perhaps:
        test caid-ident parameter in the user-settings??? maybe…

        • FC says:

          THE sssp(serial simple sharing protocol) works in Stb. I have a usb adapter rs232 connected to the pc laptop, which in turn connects to the STB. This protocol works with Mbox, Oscam,CCcam. Have already tested in various ways with Oscam, caid+ident(reader;user) but without success. In other programs (Hdvb+Mbox) operate those 2 providers. I think the versions for windows does not work 100%.

          Thanks

          • kbrause says:

            This is a problem of your STB and/or “client” SSSP
            think: this one can’t handle multi-caid. so it use the first caid to reqeuest oscam…

            fakt: if the wrong caid is requested in oscam => always the client+STB make problems!!!

        • FC says:

          First of all thank you for your answers. I think the problem is not with the STB,because in Mbox and Hdbv(cccam) i can catch these caid’s. Only that with these two emus,i have chance to give priority to caids,while in Oscam for windows i have no such solution at least that i know! My insistence Oscam and that to open a channel delay 1 sg, while in others(MBOX+HDVB) takes about 3 sgs.

          Rgds

          • kbrause says:

            Increase the log level in OSCAM: Now you see that STB no polls this CAID’s!
            If the CAID are queried, can with the WITHELIST in OSCAM change the priority.
            The USER can give in (initial) connect-phase preference to clients (if the client supports this) the SERVER can configure only the “cards”

            !!! Your STB quiery only the first CAID in the CAT!!!

            >> http://www.streamboard.tv/wbb2/portal.php

          • FC says:

            The file Oscam.Whitelist , but still appear the caids 1811,1812,0628,how can i ignore them and give priority to others. The prioridaded of the oscam,whitelist, the reader, or in user, since i be customer.. I suppose that this is the oscam.whitelist.

            http://cjoint.com/13av/CDqpCxFPPj9.htm

            Thanks

          • kbrause says:

            Oscam.Whitelist dosn’t effect if the CAID isn’t requested!
            first you must see that the client request the right CAID (increase the log-level!) with an error, so you can solve this or give the right prio with Oscam.Whitelist.
            oscam can’t give a cw for a CAID the STB/client isn’t requested!!!

          • FC says:

            The DVBapi is not available for Windows,ai would have chance to give priority to the caids. Can you explain how to operate the oscam.whitelist ,because the oscam and somewhat complex. And how is that to increase the log?, sorry all these doubts and thank you for responding.

            My problem are these caids: 0500:032830 +0500:042700. I am Hispasat,Hotbird, Astra and everything that is to open the Oscam opens less caids.

            Thanks

          • kbrause says:

            oscam.whitelist is working an windows (compiled with DVBAPI)

            increase the log-level on OSCAM so you see not OSCAM is less the CAIDS!! your STB-client is only request the very first caid on the program’s CAT

            You can not get the structure to fly if your STB does not support it!! Oscam is innocent!

  162. Mr xfigher says:

    Why Does It Keep Crashing On Windows???!

    • oscamwindow says:

      from here, only 5237 build is stable for me (win xp sp3, omnikey).
      All other builds, crash or freeze after few minites.
      oscamlancher detect only crashing (oscam process stoped) but the are cases like oscam alive but not respanding ( tcpconnect failer)

      Sorry for my poor english

  163. Mr xfigher says:

    The Best Version I found is 5895 ….

    Can we have an oscam launcher that can restart even after 5 times crashes??

  164. Mikaeel says:

    Hi, Thanks for your great build service but it has been stopped since 26 March again. Did you have serious problem with the building process?

  165. Nome says:

    Hi.

    I have one interesting problem. On Windows Vista Smargo reader and OSCAM are wiring without problem, but on windows 7 with all same settings I get this errors:

    2013/04/15 02:36:16 0 s >> OSCam < CAID: 0B00 PROVID: 000000
    2013/04/15 02:36:17 0 s v13 [mouse] creating thread for device /dev/ttyS8
    2013/04/15 02:36:17 7FF83380 h webif: decompressed 52670 bytes back into 150580 bytes
    2013/04/15 02:36:17 0 s loadbalancer: can’t read from file /Users/Home/AppData/Local/Temp/_oscam/stat
    2013/04/15 02:36:17 0 s waiting for local card init
    2013/04/15 02:36:22 7FF83380 h HTTP Server listening on port 16002
    2013/04/15 02:36:22 7FF74C40 r v13 [mouse] Reader initialized (device=/dev/ttyS8, detect=cd, mhz=357, cardmhz=357)
    2013/04/15 02:36:23 7FF74C40 r v13 [mouse] card detected
    2013/04/15 02:36:26 7FF74C40 r v13 [mouse] Error activating card.
    2013/04/15 02:36:35 0 — Skipped 2 duplicated log lines —
    2013/04/15 02:36:35 7FF74C40 r v13 [mouse] card initializing error
    2013/04/15 02:36:35 0 s init for all local cards done
    2013/04/15 02:36:35 0 s anti cascading disabled

    • kbrause says:

      Try the new FTDI Driver

      • Nome says:

        Hi.

        Thanks for suggestion. I tried with I think last drivers (2.8.28.0, 18.1.2013).
        Also tried with old drivers (used in Vista) and each time I have same errors.
        I forgot to mention that I tested this on two different PCs, one is Laptop with Vista OS (working) and PC with Windows 7 (not working). I also tried different USB ports but without luck.

        It is strange that is the same behavior if card is inside reader or not (same errors).

        • Nome says:

          Hi.

          Found solution for this problem. Downgraded drivers for USB serial port to 2.2.4.0 and also USB serial converter to 2.2.4.0.

          • kbrause says:

            I had similar problems that are now all solved with 2.8.28!
            Good to know that 2.2.4 is an option when 2.8.28 doesn’t work 😉

  166. Hello everyone. Sorry about the build process. I had a few problems with the build server which crashed and I lost the cygwin enviroment. I also been very busy with real life stuff, I started working for a new company and been working on some other projects.
    I am rebuilding the cygwin automatic build process and should be working again soon.
    I was having a few problems compiling cygwin with PCSC support but thanks to kbrause I found some working methods at the streamboard link he provided and I managed to get a good compilation.
    I think the new build server will be ready this week.

  167. The build process is now up and running again.
    It has a brand new cygwin enviroment with the most recent packages installed.
    It is advised to update your cygwin dlls and use the ones provided on this page.
    Please test if this versions (from 8625) are working fine with card readers and leave some feedback.

    Thank you. Come again…

    • kbrause says:

      Hi Hugo
      Thank YOU for the good service 😉
      at first, i have ‘add the update-compilation (Think you’ve found the problem itself, but the others compile yourself …) => see Link above

      Unfortunately, i can’t make PCSC-Test befor Thursday, have no access to Pay-TV cards, on trip, but my own had still work fine (with PCSC) 😉

  168. DragonQ says:

    With the new cygwin dlls I just get an error that cygz.dll is missing when I try to run OSCam. 🙁

  169. FC says:

    I have portable pc with windows xp sp3 32 bit, with a line newcamd and three lines cccam .

    With versions i386 connects all the lines, but any version i686 only newcamd line connects me why? is there any reason.

    Thanks

  170. Peter Chávez says:

    Hello,

    thanks for your new compile. But whit this version (Omnikey 3121) I get constant ecm times of 3000ms.
    I had that problem with my own compile, too. When I replace cygwin1.dll with older version , it runs better.

    Greetz Peter

    • What version of cygwin1.dll is working better for you?

      The dll pack contains 1.7.17.
      You can check the properties of the file and there is a “Details” tab which shows the version.

    • kbrause says:

      The CYG DLL’s version is dependent on the version for which it was compiled.
      You can use a newer version of DLL’s (Backwards compatible) as compiled, but is not recommended. An older version of the DLL’s should be avoided.
      !!But!! Older sometimes work better (but should be an absolute exception)
      But then all the DLL’s should be from the same version!!!

      The best result is obtained when we directly compiled with the older version!
      My recommendation: Compile with CygWin 1.5 and then distribute EXE with associated “1.5 DLL’s”

    • radical says:

      Newcamd also gives me ECM-Times over 3000ms.
      With camd35 seems everything ok with timings, but I still seeing freezers on playback.

  171. kbrause says:

    Oh Forgot: There is no way to install a older Version of CygWin (as i know). if you have a solution to do that, let me know it

  172. Peter Chávez says:

    for me only 1.7.0 dlls are working ok.but i dont know where the problem is with 1.7.17..

  173. kbrause says:

    cygwin.dll V1.7.18 is out…
    cyggcc_s-1.dll newer Version is out (03/04/2013)

    i can’t test (on trip)…

    my own is also compiled with V1.7.0!!

  174. Peter Chávez says:

    little update, I compiled with new 1.7.18 and everything seems to work fine for now. Constant ecm times for me.

  175. Owen says:

    I have loaded todays latest oscam and cygwin files and now it takes 3000mS to decrypt when with old files i get less that 160mS.

    I have loaded latest oscam and all is well so far 30mins of running.

    I was updating due to crashing of oscam but now will have to try something else…….. linux maybe?

    • kbrause says:

      You see the posts above: The result isn’t stable and must be optimized…
      Workaround: you can replaced the cygwin1.dll with V1.7.18

  176. DragonQ says:

    r8636 still just exits after displaying the usual “MS-DOS style path” warnings and writing “waiting for local card init” to the log. I’m using the Cygwin DLLs from this webpage and the same .conf/.server/.user files that work for me with r6089.

    What am I doing wrong? 🙁

    • radical says:

      For me it’s working with an V13 NDS Card. Only Newcamd Protocoll still giving ECM times over 3000ms.

      6089 is really old. Is this the latest Version working for you?
      In the meantime configuration of Oscam for sure have changed.

      • DragonQ says:

        r6089 is the last “stable” version. It could be that the configuration files have changed since then but the up-to-date versions from this website never just exited/crashed until the recent change of DLLs. They just generally had higher ECM times than r6089, which is why I still use the old version.

        I’m using Windows Server 2012 by the way.

        • radical says:

          All I can say is, except newcamd, it works. So i think it’s an misconfiguration.

          If you the one from MP-forum, you can PM me there.
          I’ll try to help.

    • HBenzler says:

      Hi,
      I have the same problem (responstime is now >3000ms sins last update). Is the problem solved in any way.

  177. Trinidad says:

    I can confirm that the newest Versions (86xx) dont support Easymouse 2 and Sky S02 Cards well. I took Version 7518 as mentioned here before and it runs just fine. Card is recognized instantly without delays. My OS is Win XP Pro 32 SP 3.

  178. Trinidad says:

    Oh, I should mention that Oscam 7518 wants “cygcrypto-0.9.8.dll”. Since I didnt have it, I just took the actual “cygcrypto-1.0.0.dll”, renamed it to “cygcrypto-0.9.8.dll” and placed it besides the existing “cygcrypto-1.0.0.dll” into cygwin/bin and there you are, it works perfectly.

  179. Joacim says:

    My setup with Oscam server (1.20-unstable_svn build #6451) and Acamd client (0.6.2.0) and get in oscam log:
    “mptest (0500&020500/0BFE/3F:1957): not found (318 ms) by phoenix (key to use is not the curren…”
    AU doesn’t work anymore.

    Do you have an idea what the problem can be?

    I tried to upgrade the oscam binaries (incl Cygwin) but for some reason it cannot communicate with the card (viaaccess)

  180. Lujo says:

    Can you please update cygwin1.dll from 1007.17.0.0 to 1007.18.0.0 version.
    1007.18.0.0 is the version which is working fine with oscam-cygwin-svn-8642 version.
    You can also send me email and I will send you 1007.18.0.0 cygwin1.dll back.

  181. Sjakko says:

    Sometimes after having no problems for a week OSCAM will suddenly show timeouts and my recordings will stop. Restarting OSCAM is the solution. Using v8637. Win7 x64. Smargo Smartreader Plus firmware 1.5, ACamd 0620, MDAPI Plus 0.9.0.1589. Any ideas?

  182. kbrause says:

    i can’t reply to “Joacim says: May 5, 2013 at 8:02 pm”
    alway get message: “Your comment is awaiting moderation.”

  183. kbrause says:

    To: “Joacim says: May 5, 2013 at 8:02 pm”
    There is no Support for Card ’20500′
    See
    http://www.streamboard.tv/oscam/wiki/CardsList
    Support request (for the Card):
    http://www.streamboard.tv/wbb2/board.php?boardid=235

  184. Your comment is awaiting moderation says:

    There is no Support for Card ’20500?
    See
    http://www.streamboard.tv/oscam/wiki/CardsList
    Support request (for the Card):
    http://www.streamboard.tv/wbb2/board.php?boardid=235

  185. carlo says:

    Hi,

    i am having problems with new oscam releases (r8645) and the cccam reader connected to a remote server.

    the log says:

    2013/05/14 19:18:36 2004A2D8 p mycccamreader [cccam] disconnected: reason close

    same server with different oscam version is working fine.

    any clue?

    Thanks

    • kbrause says:

      You’ve even found the solution: r8645 do not use!
      Tests, newer Revisonen whether the error occurs persistently:
      Yes: Error reports in Streambeord.tv
      No: use next version!

  186. wave says:

    cygwin1.dll v1.7.18 (1007.18.0.0) inside official package (mirror):
    http://cygwin.digitalnova.at/release/cygwin/cygwin-1.7.18-1.tar.bz2

  187. Mesomorf says:

    URGENT INFORMATION !!
    For those with high ECM value (3000 ms):
    Update the cygwin1.dll (actually downgrading also worked for me).
    The only thing that does NOT work is using the included cygwin package in this blog

    I have tried most builds with different readers and computers. Everything gave me 3000 ms … when I upgraded (or downgraded to a dll built year 2009) the ECM dropped to 115 ms.

    So go to cygwin.com and run setup.exe.. pick the cygwin1.dll from the c:\cygwin folder.. done!

  188. Stephen says:

    Great work on OSCAM for Windows! is there a build where you can add TK’s ot the reader such as the Oscam tweaked by OZir? I have friends whose DM500 cannot read the new cards internally and need a Windows version to use an external reader. any assistance is appreciated.

  189. Cygwin Dll package upgraded to version 1.7.18.

  190. bingodja says:

    Hi, how can i use windows oscam , without using oscam.dvbapi .? for HD channel, wich work with only somme Card ..
    Thanks for response.

  191. mhd says:

    hi
    [06/06/2013 13:51:33] – 13:51:33 0 s reader1 [smargo] creating thread for device /dev/com4
    [06/06/2013 13:51:33] – 13:51:33 80060C78 r reader1 [smargo] smargo init
    [06/06/2013 13:51:36] – 13:51:36 0 s waiting for local card init
    [06/06/2013 13:51:36] – 13:51:36 80060C78 r reader1 [smargo] Reader initialized (device=/dev/com4, detect=cd, mhz=357, cardmhz=357)
    [06/06/2013 13:51:37] – 13:51:37 80060C78 r reader1 [smargo] card detected
    annother
    80060C90 r reader1 [smargo] IFD: Device /dev/com4 succesfully opened
    [06/06/2013 13:54:49] – 13:54:49 80060C90 r reader1 [smargo] Reader initialized (device=/dev/com4, detect=cd, mhz=357, cardmhz=357)
    [06/06/2013 13:54:49] – 13:54:49 80060C90 r reader1 [smargo] card detected
    [06/06/2013 13:54:49] – 13:54:49 80060C90 r reader1 [smargo] IFD: Activating card
    [06/06/2013 13:54:49] – 13:54:49 80060C90 r reader1 [smargo] IFD: Smargo: Resetting card

    I Still it,,,,,,,,NEEDINIT (no entitlements)
    merci

  192. DragonQ says:

    Do these builds actually include PCSC support? If not, that’d explain why they never work for me…

    • Hans Müller says:

      Yes they do indeed include pcsc support. Works perfect with newest cygwin dlls.

    • DragonQ says:

      The furthest I can get on my Windows Server 2012 machine is to install OSCam as a service using [i]oscamsvc.exe[/i]. This lets OSCam start successfully but then it just crashes as soon as I try to view an encrypted channel in MediaPortal (using MDAPI and Hadu). If I use OSCamLauncher, it just says “unable to detect current version” after updating (even if I manually put the latest version in the folder) and OSCam crashes after “waiting for local card init” every time I start it.

      I don’t seem to have problems on my Windows 8 or Windows 7 machines – perhaps Windows Server 2012 does something differently that is breaking more recent versions of OSCam? r6089 definitely works fine.

  193. kbrause says:

    Your comment is awaiting moderation…

  194. kbrause says:

    r6089 is the last singlethreaded version of OSCam, since 6090 the versions are multitreaded! => see OSCam twice in taskmanager
    if you use a OmniKey reader, update the driver with the lastes from http://www.hidglobal.com
    if you change from r6089 to newer, change all cyg*.dll too!!!

    for serviceinstall try http://www.sat-ulc.eu/local_links.php?catid=2512&linkid=202162 (it’s 32Bit; mabye works with 64Bit; test it)

    are all of this without succsess, go to a “fully” OSCam-Forum eg. streamboard.tv

  195. Gerard says:

    Please help me. I try to replace my newcs server running on Windows with oscam server. I find it very difficult to understand and even can’t get THE frist step to complete (running THE server). I thinking my smargo is recognized now, but after init of my card, there comes no line ‘card detected’ . Oscamreader says server is running but nothing happens. Whats THE next step. I m trying for weeks now. Is their someone with my configuration quo can help me?

    I have:
    Windows 7 64 bit
    Smargo smartreader v2
    Acamd

  196. Gerard says:

    Here is my log

    [24-6-2013 21:22:05] – ERROR – Unable to check current version.
    [24-6-2013 21:22:05] – Starting “oscam.exe”…
    [24-6-2013 21:22:05] – Oscam is running!
    [24-6-2013 21:22:05] – Next restart at 25-6-2013 6:00:00
    [24-6-2013 21:22:05] – WARNING: oscam.conf line 7 section [global] contains unknown setting ‘saveinithistory=1’
    [24-6-2013 21:22:05] – WARNING: oscam.conf line 8 section [global] contains unknown setting ‘cachedelay=300’
    [24-6-2013 21:22:05] – 21:22:05 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8708 (i686-pc-cygwin)
    [24-6-2013 21:22:05] – 21:22:05 0 s creating pidfile /cygdrive/c/Users/Server/AppData/Local/Temp/_oscam/oscam.pid with pid 152556
    [24-6-2013 21:22:05] – 21:22:05 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
    [24-6-2013 21:22:05] – 21:22:05 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
    [24-6-2013 21:22:05] – 21:22:05 0 s signal handling initialized
    [24-6-2013 21:22:06] – 21:22:05 0 s 775 service-id's loaded in 0ms
    [24-6-2013 21:22:06] – 21:22:05 8005B1F0 h webif: decompressed 52128 bytes back into 150400 bytes
    [24-6-2013 21:22:06] – 21:22:05 0 s NL [mouse] creating thread for device /dev/com3
    [24-6-2013 21:22:06] – 21:22:05 8005B1F0 h HTTP Server running. ip=0.0.0.0 port=81
    [24-6-2013 21:22:06] – 21:22:05 0 s loadbalancer: can't read from file /cygdrive/c/Users/Server/AppData/Local/Temp/_oscam/stat
    [24-6-2013 21:22:06] – 21:22:05 0 s waiting for local card init
    [24-6-2013 21:22:06] – 21:22:06 8005E1E8 r NL [mouse] Reader initialized (device=/dev/com3, detect=cd, mhz=600, cardmhz=357)
    [24-6-2013 21:22:07] – 21:22:07 0 s init for all local cards done
    [24-6-2013 21:22:07] – 21:22:07 0 s anti cascading disabled

    My settings are:

    Server

    [reader]
    label = NL
    Caid = 0100
    protocol = mouse
    ecmwhitelist = 0100@00006A:64
    detect = cd
    device = /dev/com3
    mhz = 600
    cardmhz = 357
    group = 1
    emmcache = 1,1,15
    blockemm-unknown = 1
    blockemm-g = 1
    dropbadcws = 1
    auprovid = 00006A
    ratelimitecm = 4
    ratelimitseconds = 11

  197. Marcel says:

    Gerard, I assume your dutch… I would ask this in the dutch forums of Tweakers. A lot of ppl there that have it working and can help you. But the information you’ve given isen’t enough. Need to know your provider etc etc.

    http://gathering.tweakers.net/forum/list_messages/1421829/last

  198. kelly says:

    Hi
    I am new to oscam for windows. I have install the binaries on a windows 7 PC.
    After some tests using CCcam clients, everything almost work fine, but I have some questions :

    – when the server is started, the web console reports that cache is not sufficient. What is the parameter I should edit to resize that cache ? ..tried a few tweaks, but still have the same problem.

    – sometimes, I have some lags or freezes on my CCcam clients on my LAN. I think my oscam server does not serve the keys quickly enough to my clients. Have any idea to fix this ?

  199. kbrause says:

    @DragonQ says: June 21, 2013 at 2:33 pm

    kbrause says: June 24, 2013 at 11:02 am
    Your comment is awaiting moderation.

    r6089 is the last singlethreaded version of OSCam, since 6090 the versions are multitreaded! => see OSCam twice in taskmanager
    if you use a OmniKey reader, update the driver with the lastes from http://www.hidglobal.com
    if you change from r6089 to newer, change all cyg*.dll too!!!

    for serviceinstall try http://www.sat-ulc.eu/local_links.php?catid=2512&linkid=202162 (it’s 32Bit; mabye works with 64Bit; test it)

    are all of this without succsess, go to a “fully” OSCam-Forum eg. streamboard.tv

    • DragonQ says:

      Well I made a thread but it seems no-one knows what the problem is. It may be specific to Windows Server 2012 (Windows 8 doesn’t seem affected, strangely enough) and I am not alone with this problem.

      Running OSCam r8xxx in an Ubuntu VirtualBox works fine, so maybe it’s something to do with cygwin. :/

  200. kbrause says:

    Hi Hugo
    Way have all comments of me this note and never can see them?

    “Your comment is awaiting moderation”

  201. Harshwell says:

    Hi, can someone help me? I have a “easymouse” and copy the config from a working linux system

    [reader]
    label = HDplusSchwarz
    description =
    enable = 1
    protocol = mouse
    device = /dev/ttyS2 # I change this from USB
    key =
    password =
    pincode = none
    gbox_max_distance = 2
    gbox_max_ecm_send = 3
    gbox_reshare = 0
    caid = 1843
    boxkey = A764…
    rsakey = BF358…
    detect = cd
    nagra_read = 0
    mhz = 368
    cardmhz = 368
    aeskeys =
    group = 1
    emmcache = 1,3,2

    but with my windows-oscam, i can’t initialize the card

    [07.07.2013 00:13:33] – 00:13:33 80086568 r HDplusSchwarz [mouse] Reader initialized (device=/dev/ttyS2, detect=cd, mhz=368, cardmhz=368)
    [07.07.2013 00:13:34] – 00:13:34 80086568 r HDplusSchwarz [mouse] card detected
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] ATR: 3F FF 95 00…
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] Setting baudrate to 115200 bps
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] Calculated work ETU is 8.70 us
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] ERROR: Could not get current parity, IO_Serial_SetParity (errno=0 No error)
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] ERROR: IO_Serial_Write: Written=0 of 5 (errno=13 Permission denied)
    [07.07.2013 00:13:35] – 00:13:35 80086568 r HDplusSchwarz [mouse] Card responded ok for ifsd request of 160
    [07.07.2013 00:13:36] – 00:13:36 80086568 r HDplusSchwarz [mouse] detect native nagra card
    [07.07.2013 00:13:38] – 00:13:38 80086568 r HDplusSchwarz [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
    [07.07.2013 00:13:40] – 00:13:40 80086568 r HDplusSchwarz [mouse] T1 Resync command error, trying to reactivate!

    Maybe the settings in the device-manager for the “USB Serial Port (COM3)” are wrong or something else? Has anybody any idea?

    Thanks

  202. Steve says:

    i have problem with OScam config for Smargo

    2013/07/09 19:48:45 20088128 r kplus [mouse] ERROR: Opening device /dev/ttyS0 (errno=6 No such device or address)
    2013/07/09 19:48:45 20088128 r kplus [mouse] Cannot open device: /dev/ttyS0
    2013/07/09 19:48:45 0 s loadbalancer: can’t read from file /cygdrive/c/Users/MR6DEC~1.DIE/AppData/Local/Temp/_oscam/stat
    2013/07/09 19:48:45 0 s waiting for local card init
    2013/07/09 19:48:45 2005BA50 h HTTP Server running. ip=0.0.0.0 port=8888

    Pls tell me how to config

    [reader]
    label = kplus
    description =
    enable = 1
    protocol = mouse
    device = /dev/ttyS0
    key =
    password =
    pincode = none
    gbox_max_distance = 2
    gbox_max_ecm_send = 3
    gbox_reshare = 0
    gbox_group =
    gbox_my_password =
    readnano =
    services =
    lb_whitelist_services =
    resetcycle = 0
    smargopatch = 0
    sc8in1_dtrrts_patch = 0
    fallback = 1
    cacheex = 0
    cacheex_maxhop = 0
    cacheex_ecm_filter =
    cacheex_allow_request = 1
    cacheex_drop_csp = 0
    caid = 1820
    atr =
    boxid = 507xxxxx
    boxkey = /dev/ttyS0 50 7x xx xx
    rsakey =
    ins7e =
    ins7e11 =
    fix9993 = 0
    force_irdeto = 0
    needsemmfirst = 0
    ecmnotfoundlimit = 0
    ecmwhitelist =
    ecmheaderwhitelist =
    detect = cd
    nagra_read = 0
    mhz = 368
    cardmhz = 368
    ident = 1820:00AA60,00AA61
    chid =
    class =
    aeskeys =
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 0
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 0
    saveemm-unknown = 0
    saveemm-u = 0
    saveemm-s = 0
    saveemm-g = 0
    blockemm-bylen =
    lb_weight = 100
    savenano =
    blocknano =
    dropbadcws = 0
    disablecrccws = 0
    use_gpio = 0
    cccreshare = -1
    ccchop = 0
    deprecated = 0
    audisabled = 0
    auprovid =
    ndsversion = 0
    ratelimitecm = 0
    ratelimitseconds = 0
    ecmunique = 0
    srvidholdseconds = 0
    cooldown = 0,0

    • kbrause says:

      kplus [mouse] ERROR: Opening device /dev/ttyS0 (errno=6 No such device or address)

      This isn’t the right COM-Port (COM1 = /dev/ttyS0). Check your Port-Config and correct the device

  203. Ashley says:

    hi, I’ve been running oscam under windows for what seems like years now – all good. On an omnikey 3121 I consistently see ecm times of around 150-170ms.
    What is the stability and ecm performance like using a smargo plus reader (as I have one lying around) under windows – does it provide improved performance?
    Could I reduce the ecm times by running oscam in a VMware debian linux virtual machine with usb pass through without overclocking the card using either the omnikey or smargo plus readers?

    • kbrause says:

      i don’t know about a performance test on this scenario; test it by yourself
      but:
      the driver stack on a VM is larger than on CYGWIN and each station on the stack need processing time. so it is more then possible that VM is less than CYGWIN; maybe?!?

      • Ashley says:

        thanks. Omnikey 3121 under Debian on a pi gives exactly the same ECM times as Omnikey 3121 under windows from a test I’ve just run. (it looks like my smart card doesn’t support ins7e11=15 setting). Now let me try the smargo…

        • Ashley says:

          well, after putting in a smargo onto a powered hub, I can only get ECM times to equal the Omnikey by overclocking the card to atleast 700mhz.. so my conclusions are that the Omnikey 3121 is by far the better reader for OSCAM and works equally well under windows as it does natively under Linux on a pi. A surprtising result for me.

          Here were the ECM times that I had at the various mhz settings on the Smargo;
          250ms mhz=357
          180ms mhz=600
          164ms mhz=700
          164ms mhz=750
          card won’t initialise mhz=800

  204. Alex says:

    Why key time is too big on Oscam SVN, but on Oscam YMOD isn`t?

    2013/07/30 01:40:25 2050FA98 c astlab.tk (2710&000000/0000/84D7/4D:75740D22DC0789EA38B24A672061C1FE): found (3004 ms) by Lybed
    2013/07/30 01:40:25 20438C58 c astlab.tk (2710&000006/0000/84E8/4D:75740D22DC0789EA38B24A672061C1FE): cache2 (3004 ms) by Lybed
    2013/07/30 01:40:25 204ED590 c astlab.tk (2710&000000/0000/84E3/4D:75740D22DC0789EA38B24A672061C1FE): cache2 (3004 ms) by Lybed
    2013/07/30 01:40:25 204748A8 c astlab.tk (2710&000000/0000/84E2/4D:75740D22DC0789EA38B24A672061C1FE): cache2 (3005 ms) by Lybed
    2013/07/30 01:40:35 2050FA98 c astlab.tk (2710&000000/0000/84D7/4D:7D3846C76068AE072AAE6406F476AEFE): found (3015 ms) by Lybed
    2013/07/30 01:40:35 20438C58 c astlab.tk (2710&000006/0000/84E8/4D:7D3846C76068AE072AAE6406F476AEFE): cache2 (3005 ms) by Lybed
    2013/07/30 01:40:35 204ED590 c astlab.tk (2710&000000/0000/84E3/4D:7D3846C76068AE072AAE6406F476AEFE): cache2 (3005 ms) by Lybed
    2013/07/30 01:40:45 2050FA98 c astlab.tk (2710&000000/0000/84D7/4D:71DD2B708897B726EBF8BB9863F0BA0E): found (3004 ms) by Lybed
    2013/07/30 01:40:45 20438C58 c astlab.tk (2710&000006/0000/84E8/4D:71DD2B708897B726EBF8BB9863F0BA0E): cache2 (3004 ms) by Lybed
    2013/07/30 01:40:45 204ED590 c astlab.tk (2710&000000/0000/84E3/4D:71DD2B708897B726EBF8BB9863F0BA0E): cache2 (3004 ms) by Lybed

  205. kbrause says:

    @Hugo
    Update is broken since 7/24/2013 5:18 pm

  206. Ashley says:

    just in-case this helps anyone else trying to compile oscam under windows themselves here is the complete process (and have omnikey 3121 support);

    download cygwin from; http://www.cygwin.com/setup-x86.exe

    Install the following packages;
    – cmake
    – ccmake
    – w32api-headers
    – w32api-runtime
    – gcc
    – gcc-core
    – gcc-obj
    – libusb-win32
    – libusb1.0
    – libusb1.0-devel
    – make
    – openssl-devel
    – subversion

    start up cygwin;

    $ cd $HOME
    $ svn checkout http://streamboard.de.vu/svn/oscam/trunk oscam-cyg
    $ cd $HOME/oscam-cyg
    $ mkdir cygwin
    $ cd cygwin
    $ ccmake ..
    'c' configure
    'e' exit help
    'c' secondary config (to get around initial warning);
    'g' generate
    
    $ make
    

    the exe file will sit in; copy c:\cygwin\$HOME\oscam-cfg\cygwin\oscam.exe eg;
    c:\cygwin\home\ashley\oscam-cyg\cygwin\oscam.exe

    copy the exe file to a folder like c:\oscam
    also copt the cygwin dll files;

    c:\>mkdir c:\oscam
    c:\>cd \oscam
    c:\>copy c:\cygwin\home\ashley\oscam-cyg\cygwin\oscam.exe .
    c:\>copy c:\cygwin\bin\cygcrypto-1.0.0.dll . 
    c:\>copy c:\cygwin\bin\cyggcc_s-1.dll . 
    c:\>copy c:\cygwin\bin\cygusb-1.0.dll . 
    c:\>copy c:\cygwin\bin\cygwin1.dll .
    c:\>copy c:\cygwin\bin\cygz.dll .
    

    remember to drop in the config files for oscam;

    oscam.conf
    oscam.server
    oscam.user
    oscam.srvid
    

    to update;
    start up cygwin;

    $ cd $HOME
    $ svn update oscam-cyg
    $ cd $HOME/oscam-cyg 
    $ rm extapi/cygwin/WinSCard.h
    $ cd cygwin
    $ cmake ..
    $ make
    

    now… if only some gcc/cygwin/oscam experts could look at oscam running under windows and optomise it so oscam runs at-least as well or better than bare metal Debian using pcsc (ie. Omnikey 3121) then that would be great as this is probably the configuration that most windows users of oscam are using these days. From my understanding, oscam under Debian is around 30-40% more efficient (in terms of ecm times) than the equivalent under windows via cygwin.
    thanks!

  207. Ashley says:

    anyone there? I have a comment awaiting moderation with details around how to build under windows

  208. Smelfra says:

    Hello,

    No update since july 24th. Is there something wrong with the automated process ?
    Regards,

  209. Denzil says:

    Is the AU build knackered? Sadly no updates for over a fortnight 🙁

  210. carlos says:

    How do I use more than one OMNIKEY 3021 in OSCAM with windows?
    For if I put device = 0, device = 1, device = 3 etc. …. if I shut down the computer and reconnect everything back messy!
    How to prevent a particular card that was the device = 1 eg. back to restarting the computer device = 1 and not in the device = 0 ……
    That is, how do I fix each OMNIKEY a particular usb!
    Thanks and sorry the bad english!

  211. carlos says:

    This person below has the same problem …

    Hi,

    I have 2 omnikeys in oscam one is 0 = setanta and other is 1 = ftv card. It’s all working fine both cards have there own groups 1 = setanta and 2 = ftv group.

    I have a Powered USB Hub connected to rear usb ports of the computer and than the omnikeys are connected.

    They fully work and i have no issues, until i reboot the server than the usb ports swap and groups get mixed up ie 1 = setanta (should be 0) and 0 = ftv (should be 1). It’s like someone swapped over the cards!

    I tried searching on the forums and google but couldn’t get an answer.. The reason i want to lock the ports is i want to allow the server to reboot by it self towards the morning.

    Is there a solution for this?

    Many Thanks,
    Gee UK

  212. carlos says:

    OR … this is not going to happen?
    If I put eg. 5 omnikeys and for inserting them one by one the numbering of the device will always be the same for everyone?
    Please can your help me thank you!

    • kbrause says:

      The PCSC Instance number is depped on the plug-method.
      you can cold or hot plug…
      the only way is always plug all devices COLD:
      Connect all devices POWER-OFF than start!
      never (re-)connect a device POWER-ON!!!
      so the Instance number should be every the same
      if you change a device in PWOER-OFF (quantity, Brand or typ) the Instance number will also changed

      • carlos says:

        Ok …. Kbrause

        Thank you for the reply!
        Always helping everyone here!

        I Got! I should call all OMNIKEY together with the server off.
        After that, I’ll turn on the server and organizing the numbers of each device in OSCAM. Keeping unchanged also there is no change in the number of each reader device. Right?
        I use powered usb hub, right? Must be usb hub with external power supply, correct?

        • kbrause says:

          NO!
          all devices (+ hub) must be powered befor the server starts!!!
          and only can powered down after the server is down!!
          and never (re / un)pluged a device if the server is ON

        • kbrause says:

          divices can after the server powered down; not must!

          • carlos says:

            Let’s see if I understand:

            Energize usb hub, plug the readers, and finally start the PC.
            Without making changes to the numbering of the devices will always be the same.
            If it is to turn off the USB hub before turning off the PC.

            Ok?

            Thanks!

          • kbrause says:

            almost:
            Only the start-phase is important for COLD-PLUG to number the devices!!!
            AND
            you must avoid HOT-PLUG!!!

            so the important rule is:
            never be change anything on/with the devices if the server is powered on!!!

            the instance numbers anyhow can change:
            you add or remove a device or is defect

            but: if you knits hold on all rules (and no defect is occurred), you can re-start at will and all instance numbers are always the same

  213. Carlos says:

    I’m going to bother you for the last time:

    When you refer to cold-plug or power-off you are referring to the PC … That is, plug a reader in “cold-plug” or “power-off” is plugging the reader with the PC turned off! Correct? Excuse me, I have difficulty in interpretation in English when used certain terms … Thanks!

    • kbrause says:

      That is correct: COLD PLUG is in the off state.
      And PLUG is always (here PC) considered from the HOST from, never from the device.

      • Carlos says:

        Hello

        I installed as explained by you.
        If the PC is restarted the numbering devices remains the same.
        However, if the PC is turned off, the numbering of the devices must also remain the same? Or turn off the PC numbering of devices return mixed?
        Thank you for your patience!

        • kbrause says:

          >Or turn off the PC numbering of devices return mixed?<
          What do you want to ask so?

          Rule:
          Never change anything on power on (PC)!
          plug all device (full powered) on power off (PC)
          Never change the readers USB-Port (PC)

  214. Marcel says:

    Any update when the automated compile process is up and running again?
    Current hangs on 8837.

    Great job you guys do!

  215. Mathias says:

    Hallo,
    ich hatte bisher Oscam als Server mit Quadmouse auf Ubuntu betrieben.
    Nun wollte ich eventuell auf Windows Server 2011 umsteigen und teste daher gerade die aktuelle Oscam 8855 Cygwin auf einem Windows8 x64 Rechner.
    Die Comports sind als /dev/ttyUSB -1 eingetragen. es kommt aber folgende Fehlermeldung:

    2013/08/22 17:03:38 800B9AE8 r tnk [mouse] ERROR: Opening device /dev/ttyUSB5 (errno=30 Read-only file system)
    2013/08/22 17:03:38 800B9AE8 r tnk [mouse] Cannot open device: /dev/ttyUSB5

    entspricht also Com6, sprich 3. Schacht, belegt sind laut Gerätemanager Com4-Com7

    Habt jemand von Euch ne Idee wo das Readonly herkommt?

  216. Mathias says:

    sorry, i was a litte confused today, ist an english Chat. Oscam Cygwin is working, but with all of my Cards, last one working is 7887.
    on Linux the newest ones are working.
    so i decided to get cygwin+eclipse and have now startable binarys, but where do they search the config files ???
    btw where can i Change the Folder? -c isn’t working.

    i hope anybody can help me

  217. Marcel says:

    I’m using a smartreader plus with the mouse protocol on a windows server 2008r2 system.
    Since I’m getting a timeout error after a while >10.000 ms, I’m thinking of changing to the smartreader protocol. I can’t get this to work. How can I find the device ID (bus)? List_smargo.exe isn’t working (stack error).
    Is the smartreader protocol for my config better?

  218. Lujo says:

    Option: list_smargo.exe

    I have tried this and I get file list_smargo.exe.stackdump within:
    Exception: STATUS_ACCESS_VIOLATION at eip=0040155A
    eax=00000008 ebx=0028AC70 ecx=00000000 edx=611DE94C esi=0000002E edi=0028AC22
    ebp=0028AC48 esp=0028ABFC program=C:\Users\Lujo\Desktop\oscam-cygwin-svn-8877\list_smargo.exe, pid 24564, thread main
    cs=0023 ds=002B es=002B fs=0053 gs=002B ss=002B
    Stack trace:
    Frame Function Args
    0028AC48 0040155A (00000001, 0028AC70, 80028280, 00000041)
    0028ACF8 610078D1 (00000000, 0028CD78, 61006DC0, 00000000)
    End of stack trace

    I need this for smartreader protocol:

    bus:device: bus name and device name of the smartreader+
    (get the name with lsusb ‘Bus’ ans ‘Device’)

    But what is bus and what is device in this example?

    • kbrause says:

      there is no way to use this protocol if list_smargo dump on windows. OSCAM use the same source code to connect to this protocol. on a few windows PC’s work this, the most will not work and the only way is mouse-protocol with serial emulation eg /dev/com? or /dev/ttyS? …

  219. Motar says:

    Under Windows Server 2012 oscam says every time cannot open device (0,1,2 all tried) it worked on an Windows 7(so i guess everything is right with the oscam-settings) machine but it seems that my Server (HP Proliant N54L) can’t open the connection to my Omnikey (pcsc) properly

    if i start oscam with the reader and card plugged in, oscam terminates after 0.1 sec.

    • Motar says:

      OK i got this by myself—
      The problem wasnt the config (pcsc – dev = 0 is fine)
      The Problem wasn’t the Hardware or OS (i think it would run on WS2012 but i installed WS2008R2- startmenu yeah!)

      The Problem was the RDP-Connection – if you start oscam over an RDP connection – windows tries to connect to the remote-cardreader, using vnc or teamviewer solves this problem

  220. Lujo says:

    At this moment my oscam.conf, oscam.user etc. files are in the same directory as oscam.exe and .dll files. I want to make folder “config files” and to put all config files in this folder. Is there any option so that oscam.exe looks into this folder for config files?

  221. paul says:

    Hi,

    I’ve got a windows 7 pc server. A few months ago, I tried to make oscam work on my windows 7 system but it was rubbish… It worked, but was very unstable, it crashed so much, wasnt worth using.

    Is it worth using at this moment in time? Does it crash constantly? Is it stable? Can it handle any decent amount of peers, say 30-40?

      • paul says:

        No worries, got it working.

        Got the latest cygwin-dll and it started working properly. It’s very stable in fact, working very well with the latest oscam, win 7 and omnikey reader.

        Only problem now is oscam launcher is very outdated and it doesn’t work properly with the latest software. Maybe i’m just using it wrong… What did you guys do to get it working properly?

        It’s working great on Win 7.

  222. Pit Schnass says:

    Hi,

    it seems that the build process stopped working again. Can you please check…

    Thanx

  223. KraKra says:

    automatic building proces stopped at r8907, current revision is 8917

  224. Carlos says:

    Hello

    I use this setting down the 5080 version a long time and always worked.
    Now, to put the latest version and for example in version 8835 returns error.
    But only returns error status card reader when used NDS Videoguard. Already when using Nagravision card nagra3 everything works normal even in the latest version.
    What can it be?
    Below files:

    #####Oscam.conf:
    [global]
    nice=-20
    WaitForCards=1
    disablelog =0
    maxlogsize =1000
    logfile=stdout
    #dropdups = 1
    [newcamd]
    key=0102030405060708091011121314
    port=38006@0907:000000;38007@0907:000000;38008@0907:000000;38015@0907:000000
    [webif]
    httpport = xxxxx
    httpuser = xxxxx
    httppwd = xxxxxxx
    httprefresh = 5
    httpallowed = 127.0.0.1,1.1.1.1-255.255.255.255
    httphideidleclients = 0
    httpreadonly = 0
    httpdyndns = hostname

    #####Oscam.server:

    [reader]
    Label =ceu7
    Protocol =mouse
    #device=/dev/com10
    device=/dev/ttyS9
    detect=CD
    Customspeed = 0
    EMMCache = 1,1,2
    Group =1
    Fallback = 0
    CAID =0907
    BoxID =xxxxxx
    blockemm-unknown =1
    cardmhz = 357
    mhz = 357

    [reader]
    Label =ceu8
    Protocol =mouse
    #device=/dev/com3
    device=/dev/ttyS2
    detect=CD
    Customspeed = 0
    EMMCache = 1,1,2
    Group =8
    Fallback = 0
    CAID =0907
    BoxID =xxxxxxx
    blockemm-unknown =1
    #blockemm-u =1
    cardmhz = 357
    mhz = 357

    [reader]
    Label =ceu9
    Protocol =mouse
    #device=/dev/com4
    device=/dev/ttyS3
    detect=cd
    Customspeed = 0
    EMMCache = 1,1,2
    Group =9
    Fallback = 0
    CAID =0907
    BoxID =xxxxxxx
    blockemm-unknown =1
    #blockemm-u =1
    cardmhz = 357
    mhz = 357

    [reader]
    Label =ceu10
    Protocol =mouse
    device=/dev/com1
    #device=/dev/ttyS3
    detect=cd
    Customspeed = 0
    EMMCache = 1,1,2
    Group =10
    Fallback = 0
    CAID =0907
    BoxID =xxxxxxx
    blockemm-unknown =1
    #blockemm-u =1
    cardmhz = 357
    mhz = 357

    Thanks!

  225. Carlos says:

    That is very strange ….
    With the standard configuration posted above works in version 5080 and older ones, and also with version 6000 and 6100, I tested.
    Jpa with other newer versions do not work. Returns error in reader / card when trying to load.

  226. WBMK says:

    Hi,

    I have a Smargo V2 USB cardreader and i am trying to get it to run using this OSCAM version.. However, i am getting a arror when initialising the reader stating:

    libusb_open unknown error: -12

    I am using this device line in my config:
    protocol = smartreader
    device = SRv2;Serial:

    where is substituted for my device.

    I am using the latest FTDI VCP drivers for the smartreader..

    Does anyone know why i recieve this libusb error?

  227. polux says:

    http://www.argolis.com/downloads.html

    v2 update

    and try :

    protocol =mouse
    detect = cd
    device = /dev/comX ( x = your port com )

    • WBMK says:

      Thanx for your reply,

      i did update my Smargo and gave it a serial using the new tools.

      However, list_smargo.exe keeps crashing..

      The mouse method does work, but not for long. After a period of time (sometimes 5 minuts, sometimes 2 hours) i am getting timeout’s (5000ms) when a client is trying to get info from oscam.

      Any ideas? regards!

  228. polux says:

    WBMK , your must to say what’s your wIndows (xp vista seven.. 32 64 ?
    and also what’s your card ..?

  229. WBMK says:

    @polux,

    I am on a Win7 64 bit machine.. The card in my Smargo V2 (grey housing, updated firmware, latest FTDI drivers) is a Ziggo card.

    I also tried the Zadig driver in combination with the smartreader or smargo protocols, but it had no effect (this way i cannot acces the reader, and initialize the card)

    It seems like the reader does not respond to reset commad’s well in mouse mode.. When time-out’s occur, i have to disable en re-enable the reader in the windows device-management for it to work again.

    Regards, WBMK

  230. polux says:

    wbmk , smargo inserted > windows device drivers >

    in usb bus controller > usb serial converter > change driver 2.8.30 for 2.8.14 (2011)
    (2.8.14 may be available in manuel local update )

    if needed , reboot your pc ..( if no needed , it’s better to reboot..)

    and download svn 6049 here :

    http://tekreaders.com/oscam/cygwin/index.php?dir=Old+Releases%2F

    and try ..

    • WBMK says:

      Hi polux,

      i tried your solution, and i am sad to say it did not work…

      I went a different road. I bought myself a TP-link router (WR1034ND V1.11), flashed it with OpenWRT, and installed oscam on it. Now i am able to access the Smargo V2 reader using the smargo protocol (this build of oscam for ar71xx devices does not yet include the SRv2 device endpoint information, so the smartreader protocol does not work)

      Thank you for helping me!

      Regards,

      WBMK

  231. WBMK says:

    polux,

    Thank you for your reply. I tried to update the driver, but my PC has crashed… Since i am on a remote desktop connection, i cannot reset the PC now.. I will try again tonight.

    regards,

    WBMK

  232. rlevis says:

    New versions of OSCam for windows say PCSC is an unsupported protocol. Is there a reason for this? I’m currently using an old version which works but has problems sometimes. Using Omnikey 1021. Can this be resolved?

  233. rlevis says:

    I should mention I’m using the Windows version with latest Cygwin DLL’s.

  234. rlevis says:

    I’ve gone back through archives and the last build that works is 8172 in Jan 24. The next one 8176 (also Jan 24) and later doesn’t work. Exact message…

    ERROR: ‘PCSC’ is unsupported reader protocol!

  235. rlevis says:

    It’s been over a week. Is no one going to reply? Is PCSC protocol not supported in the Windows build of OSCam any longer, and why not?

  236. Alex says:

    automatic building proces stopped

  237. Per Ahlbaum says:

    Hi

    I have used “OSCAM Windows setup (Auto install package)” to install my OSCAM on Windows 7. The problem is how to update OSCAM to latest build? The autoinstall setup makes catalog OSCAM/Bin/Conf/Log and when I use for example OSCAM Launcher placed in the OSCAM catalog it can`t find several files because they are into the separate catalogs bin, conf etc. I can`t eiher update and simply change the files OSCAM.exe and Cygwin dlls to the latest. My OSCAM is working and I want only to update to latest build. Today i have OSCAM 1.20 and build 5691. Please help me with advice what to do.

    • kbrause says:

      an auto-update is only recommended with a device is tested to work with the new build of oscam.

      so the auto-update is custed for the device e.g. dreambox a.s.o.

      who should do this on windows…

      do them manually update and test, if all OK stay with them; pleased 😉

      • Per Ahlbaum says:

        Manually update works ok but then webif don`t work. This is my mainproblem.

        • kbrause says:

          check the oscam.conf section [webif]

          start with a save-version e.g.

          [webif]
          httpport = 8888
          httpuser = administrator
          httprefresh = 30
          httpallowed = 127.0.0.1

          […]

          now start webbrowser with http://127.0.0.1:8888 on the same host

          :: now describe your problem…

          • perahl says:

            Hi

            I have tested this several times and the result is the same thar webif dosènt work. Earlier when I installed (Auto install package) for OSCAM windows webif worked fine. The only thing I did was to update the OSCAM.exe and cygwin1.dll and some other files from this side and Everything works fine exept webif. What is missing?

          • kbrause says:

            show on the log, there must entries like this:

            2013/xx/xx xx:xx:xx 2006A2B8 h webif: decompressed xxxx bytes back into xxxxxx bytes


            2013/xx/xx xx:xx:xx 2006A2B8 h HTTP Server running. ip=0.0.0.0 port=8888

            have a look and report if error occur…

  238. haav says:

    Hi
    Is it possible to get DVB api support in the build you make?

    BR
    haav

    • kbrause says:

      there is no way to support DVB-API on Windows!
      DVB-API is only for the LINUX DVB driver with VDR.

      BTW: there is now App on Windows that support DVB-API, so it’s no need to have that!!!!

  239. Alex says:

    Why time of responce is too big and have two value (300x ms and 600x ms)? Where is incorrect config?
    2013/11/18 06:31:46 201AD740 c 9999 (0500&040600/089F/2A32/4B:8627BD9277756D9D71ED4C28E5FA42D3): found (3004 ms) by G1_VIA
    2013/11/18 06:31:56 201AD740 c 9999 (0500&040600/089F/2A32/4B:BE78C0A898A2F497DBB7C31D89908859): found (3004 ms) by G1_VIA
    2013/11/18 06:32:04 201EE0A0 c 21 (0602&000000/0023/0259/3C:258E07744ED3D9FEC0CB9F38DD4E3F13): found (3004 ms) by G4_Igor
    2013/11/18 06:32:06 201AD740 c 9999 (0500&040600/089F/2A32/4B:7BBD9B002459C317F9884BFE5FE59381): found (3004 ms) by G1_VIA
    2013/11/18 06:32:16 201AD740 c 9999 (0500&040600/089F/2A32/4B:AA6A94D592C7B463755D4EF90FC4488E): found (3015 ms) by G1_VIA
    2013/11/18 06:32:25 201EE0A0 c 21 (0602&000000/0023/0259/3C:DB32D2BA07EA4799F2DB9B296D0FBE1D): found (3004 ms) by G4_Igor
    2013/11/18 06:32:26 201AD740 c 9999 (0500&040600/089F/2A32/4B:AD24480542F1A18A4474C248ECAA65B9): found (3004 ms) by G1_VIA
    2013/11/18 06:32:36 201AD740 c 9999 (0500&040600/089F/2A32/4B:5A23099662E0489A589C99D72DA8CE13): found (3004 ms) by G1_VIA
    2013/11/18 06:32:46 201AD740 c 9999 (0500&040600/089F/2A32/4B:0E19C4428AB361B7B5034A1E9CE5D632): found (3004 ms) by G1_VIA
    2013/11/18 06:32:49 201EE0A0 c 21 (0602&000000/0023/0259/3C:88888151366A00DEF3B6D8F6F0768860): found (6009 ms) by G4_Igor

  240. Mike says:

    Have you guys found the solution for this error?

    2 [main] oscam 4272 find_fast_cwd: WARNING: Couldn’t compute FAST_CWD pointer.

    Is there any problem using windows 8.1?

    //Mike

  241. Piratman says:

    Hello!
    I’m thinking if it is possible to configure OSCAM so you get load balancing over two different servers?

    If one of the Dreambox put two servers can interrogate both, but understand what it sends questions to both simultaneously and thereby loading both.
    If your servers instead split up the work and decide that only one to respond would help balance the load.
    However, if a server goes down there the second left and then will try to serve all users.
    Meanwhile, an administration of users on a server, resulting in this automatically copied to the other server.

    Can I do something like that?

    / piratman

  242. Alex says:

    ??? automatic building process stopped?

  243. Alex says:

    Problem with OSCAM 1.20-unstable_svn build r9271 have at all local cards 3000ms ecm time. How fix it?

  244. MKII says:

    was trying skynet card with oscam. card reset ok. ecm ok but no pic, screen blank. Please see bellow log.

    2014/01/20 07:51:17 0 s >> OSCam < CAID: 4A02 PROVID: 0004B4, 000000
    2014/01/20 07:51:18 80062E20 h webif: decompressed 54245 bytes back into 154648 bytes
    2014/01/20 07:51:18 80062E20 h HTTP Server running. ip=0.0.0.0 port=8805
    2014/01/20 07:51:18 0 s skynet [mouse] creating thread for device /dev/ttyS5
    2014/01/20 07:51:18 0 s waiting for local card init
    2014/01/20 07:51:18 80080E80 r skynet [mouse] Reader initialized (device=/dev/ttyS5, detect=cd, mhz=357, cardmhz=357)
    2014/01/20 07:51:19 80080E80 r skynet [mouse] card detected
    2014/01/20 07:51:20 80080E80 r skynet [mouse] ATR: 3B 6C 00 00 4E 54 49 43 32 8A 1A 09 4A 03 00 00
    2014/01/20 07:51:20 80080E80 r skynet [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
    2014/01/20 07:51:20 80080E80 r skynet [mouse] Setting baudrate to 9600 bps
    2014/01/20 07:51:20 80080E80 r skynet [mouse] Calculated work ETU is 104.20 us
    2014/01/20 07:51:21 80080E80 r skynet [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
    2014/01/20 07:51:22 80080E80 r skynet [mouse] Tongfang card detected
    2014/01/20 07:51:22 80080E80 r skynet [mouse] type: Tongfang, caid: 4A02, serial: #########, hex serial: ########, BoxID: ########
    2014/01/20 07:51:22 80080E80 r skynet [mouse] found card system tongfang
    2014/01/20 07:51:22 80080E80 r skynet [tongfang] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
    2014/01/20 07:51:22 80080E80 r skynet [tongfang] Provider:04b4
    2014/01/20 07:51:22 80080E80 r skynet [tongfang] Provider:0000
    2014/01/20 07:51:22 0 — Skipped 2 duplicated log lines —
    2014/01/20 07:51:22 0 s init for all local cards done
    2014/01/20 07:51:22 0 s anti cascading disabled
    2014/01/20 07:51:23 800832E8 c client connected to 5101 port
    2014/01/20 07:51:23 800832E8 c encrypted newcamd:5101-client 223.197.250.207 granted (test, au=auto (1 reader))
    2014/01/20 07:51:23 800832E8 c user test authenticated successfully (mgcamd)
    2014/01/20 07:51:23 800832E8 c AU enabled for user test on reader skynet
    2014/01/20 07:51:23 800832E8 c SID list will not be send to mgcamd client.
    2014/01/20 07:51:24 800832E8 c test (4A02&0004B4/B400/112B/79:D9F1F1B3036B8CA85F55225B4F1F57C4): found (250 ms) by skynet
    2014/01/20 07:51:36 800832E8 c test (4A02&0004B4/B400/112B/79:A240175BA56782F9B0A1FA2DAA9B2232): found (234 ms) by skynet

    2014/01/20 07:52:48 80062E20 h all debug_level=4
    2014/01/20 07:52:48 80080E80 r skynet [tongfang] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
    2014/01/20 07:52:50 0 — Skipped 1 duplicated log lines —
    2014/01/20 07:52:50 0 — Skipped 2 duplicated log lines —
    2014/01/20 07:52:50 80080E80 r skynet [tongfang] cardreader_do_ecm: cardreader_do_checkhealth returned rc=1
    2014/01/20 07:52:50 80080E80 r skynet [tongfang] write to cardreader
    2014/01/20 07:52:50 80080E80 80 3A 04 B4 53 E7 17 C0 00 14 0E 4E 3C 07 0E 73
    2014/01/20 07:52:50 80080E80 DE 9C D8 D0 0D 13 23 D9 21 74 A6 7E 5F E9 0F B5
    2014/01/20 07:52:50 80080E80 46 FA AB 58 2C 02 09 00 01 02 05 C9 F3 93 E2 06
    2014/01/20 07:52:50 80080E80 2D 6B 66 D2 F6 60 E8 B7 BE 5C A0 09 00 01 03 EB
    2014/01/20 07:52:50 80080E80 4E B0 89 BA 93 DC 7B F3 9E DB C5 27 52 12 12 39
    2014/01/20 07:52:50 80080E80 8E EA 5D A0 2F DA 13 1E
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] Answer from cardreader:
    2014/01/20 07:52:51 80080E80 61 2B
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] write to cardreader
    2014/01/20 07:52:51 80080E80 00 C0 00 00 2B
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] Answer from cardreader:
    2014/01/20 07:52:51 80080E80 0A 04 B4 00 14 0E 4E 3C 6B EB B7 3D 57 F1 9C 1A
    2014/01/20 07:52:51 80080E80 7D 1D 3A 8D 94 AA B5 3E 00 0C 5E 00 01 00 00 00
    2014/01/20 07:52:51 80080E80 00 00 00 00 00 00 00 00 00 00 00 90 00
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] cardreader_do_ecm: after csystem.do_ecm rc=1
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] cardreader_do_ecm: ret rc=1
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0)
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] ecm hash: C3B37491ABE7FF1781D45C999461E31C real time: 234 ms
    2014/01/20 07:52:51 800832E8 c test (4A02&0004B4/B400/112B/79:C3B37491ABE7FF1781D45C999461E31C): found (234 ms) by skynet
    2014/01/20 07:52:51 80080E80 r skynet [tongfang] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

    any expert solutions?

  245. Lujo says:

    It seems that it is not possible to add file “oscam.dvbapi” which will be used by this oscam.
    I want to add rule:
    P:0100:00006A:::5C00 # Priority to SECA3 (CDS)
    to prevent this error:
    2014/01/23 14:55:03 200A49C8 c tbs6922 (0100&00006A/FD10/0FCD/64:661EB985376317056F101F7E21170D65): rejected group (0 ms) (no matching reader)

    Is it true that oscam.dvbapi is disabled and why?

  246. Rafale says:

    Hi,

    The last working version with Smargo and smartreader protocol is oscam-cygwin-svn-8575. Something changed after this, all later versions only work with mouse protocol and old FTDI drivers.
    protocol = mouse
    device = /dev/com3

    8575 works with latest zadig.exe (libusbx.org) and the smartreader protocol. Which I think is faster.
    protocol = smartreader
    device = Serial:Reader 1

    Anyone encountering the same. I also noticed list_smargo.exe is only included from oscam-cygwin-svn-8625. It does not return any devices, while version 8575 detects my smargo fine?

  247. Rafale says:

    Update: Solved everything by recompiling with latest cygwin 32 bit and latest oscam svn (using latest libusb sources).

    oscam works fine now with smargo and smartreader protocol. Install windows drivers using zadig.

    I guess the binaries here are compiled with and older cygwin version and libusb sources???

  248. Lujo says:

    I am having problem that when using OscamLauncher or nssm.exe to start oscam that two oscams are started.
    Normal behavior is to start only one oscam.exe, right?

    In Windows Task Manager one oscam is 4.380 K and another one 5.832 K

    Because of this my oscam is not working and I am to able to use webinterface.

    My machine is: Windows Home Server version 1 (based on server 2003).
    oscam is running on

  249. carlos says:

    Hello

    You compile any version of oscam on linux to exe?
    Ie if I have a version of oscam on linux you can convert into exe / windows?
    thank you

  250. carlos says:

    Hello

    Anyone here could help me?
    I want to know how do I build a particular version of oscam. I want to compile the linux platform for windows (. Exe). I have a version of oscam on linux and want it to work on windows. Thank you very much.

  251. carlos says:

    Hugo and Kbrause,

    Ok, thanks for the help.

    Hugo, I’ll be making a donation.

    It is as follows:
    I want to get a version of oscam on linux and get it to work on windows.

    I know there is always here on this blog almost every day new releases.

    But I want to I make such a conversion. As I said already, I like to study and want to play with it. So if you can show me the way I’ll be grateful.

    I use windows 7 and Ubuntu 10.04.

    • kbrause says:

      you need the same Revision for Linux ”AND” Windows?

      ! So you compile your own on both !
      => to get the same Revision add the ”-r” param to the ”svn” command

      • carlos says:

        Hello

        I want to get an X version that already exists and works on Linux and make it work on windows.

        Ok?

        Can you tell me what all should I do?

        Thank you.

        • kbrause says:

          that isn’t possible!!!!

          you can:
          compile with the same configure on linux and windows (both) but it isn’t the same: there are many differences in source code between linux and windows…
          the source code have conditional building settings so you get a linux version und a windows version with in the same revision!! but not the same binary!!!!!!!!!!

          • carlos says:

            I think I explained badly ….

            The new versions of oscam are always posted in forum oscam on linux version.
            Right?
            How do I compile a given X version of oscam to work on windows (. Exe)?

          • kbrause says:

            What is ‘X’ Version??
            Impute: SVN Revision
            Show here http://www.streamboard.tv/wbb2/thread.php?threadid=35909 <= show my posts
            change the SVN – command, add param '-r %REVISION%' to SVN-command.
            from build to build you can increase the %REVISON% but not decrease!!!!
            best case you have a own folder for each REVISON e.g.
            svn -r %REVISION% co http://streamboard.de.vu/svn/oscam/trunk oscam-%REVISON%
            rest of 'making' is same as the Streamboard-posts

  252. carlos says:

    Ok Kbrause thanks!

  253. redady says:

    What Hawa oscam suitable for me [root@E2Plus:~]# cat /proc/cpuinfo
    Processor : ARM926EJ-S rev 5 (v5l)
    BogoMIPS : 179.81
    Features : swp half fastmult edsp java
    CPU implementer : 0x41
    CPU architecture: 5TEJ
    CPU variant : 0x0
    CPU part : 0x926
    CPU revision : 5
    ——————————Thank you very much——————————
    Cache type : write-back
    Cache clean : cp15 c7 ops
    Cache lockdown : format C
    Cache format : Harvard
    I size : 16384
    I assoc : 4
    I line length : 32
    I sets : 128
    D size : 16384
    D assoc : 4
    D line length : 32
    D sets : 128

    Hardware : E2Plus 2012 GX3xxx

  254. redady says:

    Thank you very much kbrause

  255. Winwin says:

    oscam 2764 find_fast_cwd: WARNING: Couldn’t compute FAST_CWD pointer

    When I start Oscam under Windows Server 2012 R2, this error is shown.
    It means that the cygwin dll files are to old and do not support Win 8.1 or Server 2012R2
    Could you compile an oscam version with ne newest cygwin dlls and upload that here?

    Thanks!

    • Funsurfer says:

      Hy,

      i’ll also becom this error. Bunt on Win 8.1 it works, but on server 2012R2 it will not working. It crashes on evry start.

      On both machines it is the same folder.

      Can you please help me?

      BRGDS

  256. Judasa says:

    Hi all. I use phoenix reader with ftdi. Oscam is installed on windows 2008 R2 64 bit. After several time local reader just stop work. Oscam use other proxyes, but after 1-2 hour all oscam just stop working.
    I move to other USB ports, but no change 🙁
    Any ideas? Thanks.

  257. theboss says:

    for a server with more than one oscam, it is possilble to change the oscam.exe name to oscam1.exe so that the launcher control only it’s own oscam1.exe – and the oscam2.exe works with a second oscamlauncher? – best regards – tb

  258. Erik says:

    oscam dont work in Windows Server 2012 R2 ? i cant get it work

  259. funsurfer says:

    oscam dont work in Windows Server 2012 R2 ? me too!
    Dont work

  260. Erik says:

    What is this ?

    find_fast_cwd warning couldn’t compute fast_cwd pointer

  261. funsurfer says:

    found it.

    for Server 2012 R2 you need to compile your own OSCAM with cygwin x64.
    all other dont work at the Moment.

    For Compiling:
    – Download cygwin x64 setup
    – lunch it, and add packages uder devel:

    *cmake
    *gcc-core
    *gcc-g++
    *libusb1.0
    *libusb1.0-devel
    *make
    *openssl-devel
    *subversion

    – lunch Cygwin x64 Terminal
    – svn checkout ?http://www.streamboard.tv/svn/oscam/trunk oscam-svn
    – cd oscam-svn
    – change in makefile “CONF_DIR = /usr/local/etc” to “CONF_DIR = ./”
    – make cygwin

    for running you need the following x64 dll’s:

    cygcrypto-1.0.0.dll
    cyggcc_s-seh-1.dll
    cygusb-1.0.dll
    cygwin1.dll
    cygz.dll

    this worked for me fine!
    all errors gone.

    Brgds

    • christian says:

      Hi,

      did the same. But Oscam won´t start using Windows Server 2012 R2. It simply crahes with an exception.

      Any hints?

      • funsurfer says:

        I can upload mine, if you want 🙂
        It runs very stable on my server

      • wuselwurm says:

        if your oscam crashes immediately with execption try another cygwin1.dll (use the one from /bin directory from cygwin, not in /usr directory.

        but i have another problem with crashes. the oscam 1.20 are very unstable. i use an old 1.10 at the moment which runs for weeks without problems. none of the tested 1.20 runs longer as 30 minutes for me on cygwin – sometimes just 3-5 minutes on cygwin. don’t know what to do…

  262. Nertil says:

    I just love it, fast, stable, even more stable than oscam in linux!

  263. Nizer says:

    Hello

    I use OMNIKEY 3021 with windows 7.
    I used version 1.20 8835. But suddenly started to lock the PC.
    Checked everything here and it was detected the version of oscam.
    Well I put the 9613 version also crashed.
    As for version 1.00 5080 old who wore long ago not latch. I went back to her place and it worked 100%. The problem is I have no access to the tiers of the cards in this version.
    I use oscam loader launcher that I downloaded here. With version 5080, appears written:
    Your version is # 5080. Latest version is # 9613.
    Strangely tested in 8835 and 9613 versions written in the launcher appears it was not possible to detect the version of oscam. ‘Cause this? What problem will be?
    And when it crashes the PC to restart / reset it does not touch anything, not the mouse.
    Which version is well estáel with OMNIKEY, oscam launcher and windows 7?
    Thank you.

  264. Der Pate says:

    Hi, I am looking for oscam including ymod on cygwin basis.

    It would be great If you can help me to get the newest or a stable version.

    Thanks in advance

    Pate

  265. I take pleasure in, lead to I found exactly what I was having a look for.
    You’ve ended my 4 day long hunt! God Bless you man. Have
    a nice day. Bye

  266. Alex says:

    ??? automatic building process stopped????

  267. FARIBORZ says:

    thanks for your good site.i use oscam with pc-receiver .. connect and open chanal but in oscam exe showed this anonymous disconnected (sssp)…. whers is problem…??? please gulde me thanks

  268. Lujo says:

    Will the automatic building process be fixed?

  269. costa says:

    tenho a versão antiga do oscam 5024 quando tento por a que tem aqui não funciona .
    Não é preciso o pach instalador?

  270. polux says:

    for smargo smartreader > old FTDI drivers.> usb serial converter

    protocol = mouse
    device = /dev/comX

    http://forum.driverpacks.net/viewtopic.php?id=5207
    http://www.ftdichip.com/Drivers/CDM/CDM20814_WHQL_Certified.zip

  271. theboss says:

    sorry for distrub and my poor english 😉 the last update was on the 20 april – can you resolve it please? best regards and thanks – tb

  272. Harald says:

    who knows, how the link from alex work? i can’t fix the error

  273. Martin says:

    Hi,

    can you please fix building process?

    Thx and Regards

    Martin

  274. pls says:

    Plz fix build process. Is it possible?

  275. Alex says:

    Push anybody admin!

  276. Google says:

    This is because this device assures to either benefit or cure the autistic people
    in more ways than one. These pre-computed numbers, hold on in a very giant
    information bank for millions or URLs on the net.
    You need to make your potential customers aware of your products and
    services to ensure that they recognize them as valid solutions to their everyday problems.

    Also visit my web site: Google

  277. Gary says:

    Any chance of an update, if possible? Thanks

  278. gecco says:

    Great service – thanks!!
    Any plans on fixing the build process?

  279. Harald says:

    Hi,
    who can help me compile a version with pcsc support?

  280. Alex says:

    Changeset 10096

  281. Nazaro says:

    Hi,

    I would like to use this oscam with a smargo reader in order to read a NAGRA SMARTCARD.

    When i try to run oscam, oscam can’t initialize the card becouse NAGRA is not supported from this OSCAM. Is it the truth? This Oscam doesn’t support NAGRA CARDS?

    THKS ALOT.

  282. Alex says:

    Many Sanks!!!

  283. Parabéns pelo site, muito obrigado por compartilhar seus conhecimentos, através de voces finalmente consegui instalar o Oscam… mais uma vez obrigado!

  284. Sandra says:

    Please build with DVB API support because there is a new Plugin for DVB-Programs.
    Thanks a lot for your work.

  285. s3ign3ur says:

    good news 🙂 , oscam with dvbapi it’s now possible

    OSCAM: 1.20-unstable_svn Build: r10360
    enabled and fixed dvbapi for cygwin.
    now it is possible to run a dvbapi tcp server on windows.
    for example together with dvbv-dvbapi-plugin by schwa226
    thread here:
    http://www.streamboard.tv/wbb2/thread.php?threadid=42677

  286. Alex says:

    oscam-cygwin-svn-10439.zip 0.0 KB

  287. s3ign3ur says:

    hi
    files from svn-10438 to svn-10443 have 0KB
    tks for the great job
    cheers

  288. lopez says:

    Yes !! alive and kicking !! Thanks for dvbapi support.

    have a look here
    http://www.streamboard.tv/wbb2/thread.php?threadid=42677

    Thanks a lot ! Great Job

  289. FC says:

    @s3ign3ur
    @lopez

    You can load the plugin via upload files?, and has now dvbapi configuration for windows pc.

    Thanks

  290. Thanks for your OSCAM for Windows. What about OSCAM for synology DS713+, I can’t seem to finde at packet for this, can you help?

  291. Alex says:

    Any plans on fixing the build process?

  292. Tom says:

    Hello,
    is there a version incl. EMU running under Windows?

  293. grml4d says:

    i wonder how to use your release ?
    will you try to create a plugin for the dvb rendering softwares that runs under windows like progdvb ?
    that could be very cool and very nice ;’]
    thank you in advance

  294. Erik says:

    can any one upload the files so i can run on server 2012 r2 ?

  295. MFco says:

    Hi @Hugo,
    build process is maybe broken again, please fix it.

    Regards and thx for the cygwin builds.

  296. Alex says:

    Any plans on fixing the build Oscam process?

  297. Franco says:

    Goog Morning,
    Where is the windows new version?

  298. Tom says:

    Hi I stumbled on this side whiles researching OScam,
    I am new to the whole concept of Oscam, I am not even sure where to start or how to configure OScam on windows 7.
    My system is as follows:
    Windows 7, DVBViewer 5.5.0 Pro.
    so What version of OScam where to download and installations instructions.

    Appreciate your supports, great work

  299. Amauri says:

    Hello , friend, the auto-build process isn’t working, can you take a look? the cygwin version is been outdated, i was a donate for you, I hope more people do the same to great beneficts you is doing , hugs!

  300. tb says:

    the auto-build process isn’t working, can you take a look? thanks a lot for your great work

  301. amsed says:

    when I try to open Bein Sports fr in astra it gives me corrupt and don’t open the channel

  302. fonky says:

    hello

    my system is win8 x64 i use the latest build oscam 10660

    how to setup my reader ARGOLIS triple reader

    what protocol to use ??? SMARTREADER i get an error
    2015/11/17 07:51:11 0 s (reader) ARGOLIS [smartreader] creating thread for device /dev/com7
    2015/11/17 07:51:11 80061800 r (reader) ARGOLIS [smartreader] Wrong device format (/dev/com7), it should be Device=bus:dev
    2015/11/17 07:51:11 80061800 r (reader) ARGOLIS [smartreader] Cannot open device: /dev/com7
    how to get DEVICE=bus:dev ????

    when moving to MOUSE protocol
    2015/11/17 07:53:57 0 s (main) waiting for local card init
    2015/11/17 07:53:57 80061200 r (reader) ARGOLIS [mouse] Flush readed byte Nr 1 value 3b time_us 4882
    2015/11/17 07:53:57 80061200 r (reader) ARGOLIS [mouse] Buffers readed 1 bytes total time_us 81058
    2015/11/17 07:53:57 80061200 r (reader) ARGOLIS [mouse] Buffers readed 0 bytes total time_us 76175
    2015/11/17 07:53:57 80061200 r (reader) ARGOLIS [mouse] Reader initialized (device=/dev/com6, detect=cd, mhz=357, cardmhz=357

    OSCAM dont detect my card CANALSAT

    how to get oscam working and detect my card ??

    please help me

  303. pedro says:

    hola, ayuda…como configurar dongle twin + oscam cygwin….con salida usb a rs232, configurar por readers??

  304. oli says:

    Great stuff!
    Any update (>10660) available?

    O.

  305. Alex says:

    Admin! Any work will be?

  306. alex says:

    oscam reader newcamd is not working in Linux versión Checked out revision 11213.

  307. justfordosti135 says:

    Hi Fonki,

    i want to ask you, if you have any solution found for your Argolis tripple reader ?
    i have also the argolis tripple reader and i am unable to get it working ?
    let me know if you have any suggestions…
    any other advise from other member are welcome

  308. Amauri says:

    Hello friend, there is a new nightly build ? If you teach us how to make the Windows version , build it by ourself , it was less work to you, how about this ideia?

  309. Stefano says:

    Not work windows10 why?

  310. Michal says:

    Hello, if anybody wants, I compiled most recent oscam x64 for windows with PCSC support. Here is the link with most recent cygwin dlls:

    https://uloz.to/xT9Norw8/oscam-backup-rar

    I am using it on Windows Server 2012 R2 Essentials and it looks very stable. Please reply me, if it runs OK at you.

    Best Regards

    • amauri says:

      Hello Michal, thanks for the compiled new version, I made the download and will try it, I will send a feedback about the working, good work you made and when you can , compile news builds, everybody have to thank you for this, Have a good week.

      • Michal says:

        Hello, thanks, I have 10 days uptime till now without any timeouts. It looks realy very stable.

        • amauri says:

          Hello Michal, I have been testing and this build seems realy very stable ,congratulations for you, only a little problem with ftp, I tried to access the ftp to get new versions, and it not work by now, it have any problem ? byee

  311. Denis says:

    Thanks Michal.. so far so good on Windows 10 also.

  312. matrix11 says:

    Hi there just wondering do you have the latest oscam.exe for OSCam r11245 as the ver above will not work on windows server 2012.tks
    kind regards
    matrix11

    • Michal says:

      Hello, version above works on Wiindows Server 2012, you have to use my oscam.exe and cygwin dlls. If it not work, you have probably problem with config files.

  313. Michal says:

    Hello, so, you can download allways most recent version of oscam with PCSC support from my ftp:

    ftp://home.vangel.sk
    user: oscam
    pass: oscam

    Best Regards

  314. amauri says:

    Hello Michal, I have been testing and this build seems realy very stable ,congratulations for you, only a little problem with ftp, I tried to access the ftp to get new versions, and it not work by now, it have any problem ? byee

    • Michal says:

      Hello, sorry, problem was on my side. It should be OK now. If it dont work, try FTP client instead of web browser (Filezilla, total commander, etc…).
      Let me know, if it works.

  315. matrix11 says:

    Hi Michal ftp link not working at present do you have another link

    🙂 tks pete

  316. Pay says:

    Hi Michal,can you build the new version oscam and should support EMU… thankz

    • Michal says:

      Hello, I compiled oscam with emu for you, but I never used it and I havent time to try it. Its on my FTP, filename is: oscam-1.20-unstable_svn11279-x86_64-pc-cygwin-libusb-pcsc-emu.exe

      Best Regards and let me know, if it works 🙂

  317. João says:

    Hi Michal,

    I get the following error when Oscam Launcher run in a different folder than oscam:

    “[06-10-2016 12:46:23] – oscam.exe was not found on the current directory. Operation aborted.”

    It always give error regarding the version checking:
    “[06-10-2016 12:46:24] – ERROR – Unable to check current version.”

    Thank you for your excellent job.
    jp

    • Michal says:

      Hello, I didnt develop Oscam Launcher, I dont know if it is supported anymore. You have to use it in same directory as oscam.exe, or you can download Oscam_setup_1.2.exe install it, stop service Oscam Helper, replace dlls and oscam.exe from my FTP and start service Oscam Helper. You will have oscam running as service and you can place config files in separate folder. For me, this is most stable way to use Oscam on Windows for now.

  318. ouchraa says:

    it’s work 100% win7 x64 & win8 x32

    But I have problem “timeout” when the users

  319. chaki says:

    I like your post …please tell me details about this post…

  320. xRayx says:

    thanks for updating the new version!!

  321. Vitor says:

    Boas

    É pena, que o Hugo Rosário não tenha dado continuidade a isto,eu sei que temos prioridades na vida possivelmente factores profissionais lhe retirem tempo para isto,mas de qualquer forma todo o trabalho realizado merece o meu apreço.

    Não sei se alguém poderia ir metendo aqui as compilações cygwin , não sobrepondo o “dono” do site…

    Agradeço

  322. eru8or says:

    HI Guys,

    I think I found a solution to the cardreader timeout which seems to be a OSCAM common issue on Cygwin/Windows.

    In the file csctapi/io_serial.c

    I added two lines:
    + if (timeout_us<2000) timeout_us=2000;
    int64_t polltimeout = timeout_us / 1000;
    + if (polltimeout Advanced and set the USB Packetsize to the minimum of 64 bytes and the Timeout (ms) to the minumum of 1.
    Deactivate any Power Management options like suspend on idle and disable the systems USB PowerManagement.
    My system is Windows server 2012r2, you may be out of luck on other platforms.
    Please let me know if and how this works for you.

    • Michal says:

      Hello,

      I have some questions:
      – + if (timeout_us<2000) timeout_us=2000; – where you added this line?
      – int64_t polltimeout = timeout_us / 1000; – same line is already in io_serial.c
      – + if (polltimeout Advanced and set the USB Packetsize to the minimum of 64 bytes and the Timeout (ms) to the minumum of 1. – can you explain what you think?

  323. KroKoFox says:

    Hi,

    tryed to get the latest Windows build to run. Can anyone tell me how to set up oscam.server right ? i own a smargo v2 and a Phoenix Cardreader. very frustrating. On rasp everthing works fine. 🙁 Help ? Thank you 🙂

  324. 5001 says:

    Can you upload oscam-cygwin-svn-11360.zip or last version for wimdows ? Thanks,,,

Leave a Reply

Your email address will not be published. Required fields are marked *

Please calculate the arithmetic expression to validate you are human. *